Laser propulsion powers next-generation aerospacecraft

Sept. 1, 2009
In contrast to the Space Elevator concept, in which high-power continuous-wave lasers beam light to photovoltaic cells attached to a vehicle that rides into space on a cable at relatively slow 5 m/s speeds, beamed-energy propulsion (BEP) focuses a megawatt-level peak-power laser on a propellant onboard a next-generation nano-satellite launcher to boost a kilogram of payload into low-Earth orbit.

In contrast to the Space Elevator concept, in which high-power continuous-wave lasers beam light to photovoltaic cells attached to a vehicle that rides into space on a cable at relatively slow 5 m/s speeds, beamed-energy propulsion (BEP) focuses a megawatt-level peak-power laser on a propellant onboard a next-generation nano-satellite launcher to boost a kilogram of payload into low-Earth orbit. While BEP technology advances over the years have been largely theoretical, researchers at Rensselaer Polytechnic Institute (Troy, NY) and the Instituto de Estudos Avançados (São José dos Campos, Brazil) are demonstrating airbreathing laser-thermal propulsion at hypersonic speeds in the laboratory for the first time.

An 1800 MW maximum-peak-power CO2 laser (90 to 100 ns peak power pulse duration for a pulse approximately 1 µs long) is beamed to a “LightCraft” test fixture inside a hypersonic shock tunnel and focused using 2-D parabolic optics into the engine absorption chamber. Similar to the operation of a chemical-fueled scramjet (a supersonic ramjet or jet engine that depends on supersonic forward motion to compress the captured incoming air), the laser super-heated air expands rapidly to produce thrust. The experiment explores full-size-engine physics under simulated flight speeds of Mach 7 to 9, wherein the laser engine transitions from airbreathing into rocket mode at the top of the atmosphere. Contact Leik Myrabo at [email protected].

Sponsored Recommendations

Advancing Neuroscience Using High-Precision 3D Printing

March 7, 2025
Learn how Cold Spring Harbor Laboratory Used High-Precision 3D Printing to Advance Neuroscience Research using 3D Printed Optical Drives.

From Prototyping to Production: How High-Precision 3D Printing is Reinventing Electronics Manufacturing

March 7, 2025
Learn how micro 3D printing is enabling miniaturization. As products get smaller the challenge to manufacture small parts increases.

Sputtered Thin-film Coatings

Feb. 27, 2025
Optical thin-film coatings can be deposited by a variety of methods. Learn about 2 traditional methods and a deposition process called sputtering.

What are Notch Filters?

Feb. 27, 2025
Notch filters are ideal for applications that require nearly complete rejection of a laser line while passing as much non-laser light as possible.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!