European Solar PV market faces instability for next five years

July 15, 2010
London, England--The pace of the European solar photovoltaic (PV) market in the first half of 2010 was dominated by . . .

London, England--The pace of the European solar photovoltaic (PV) market in the first half of 2010 was dominated by the impending mid-year incentive tariff reductions in Germany and conditioned by the lower module pricing that emerged through 2009, according to the latest report from Solarbuzz, Europe PV Markets 2010.

"Despite the strength of end-market demand, which was one-third higher in Germany in the first half of 2010 than in the second half of 2009, the first PV module price increases of 2010 only emerged in June," noted Alan Turner, vice president of European market research for Solarbuzz. "Even then, the increases in euro terms only partially compensated for the deteriorating price picture in dollar terms caused by the euro's dramatic decline against the dollar. Such is the strength of supply growth in the PV industry."

German PV market reaches 3.87 GW, up 109% over previous year

Looking back at 2009, the German PV market reached 3.87 GW, a growth of 109%. The growth would have been even larger if not for a shortage of inverters that has curbed the market since September 2009. The largest customer segments in 2009 were investor groups (42% of the on-grid market), agricultural (18%), and commercial (14%), with utility and government customers playing a smaller role. Private residential PV systems accounted for 13% of the market.

With 770 MW of newly installed capacity, Italy became the world's second-largest PV market. The Czech Republic, France, and Belgium combined to add 933 MW of newly installed capacity in 2009.

Growth of the total European market was just 16% in 2009, while growth excluding Spain was a remarkable 126%. This highlights the vulnerability of the overall market to policy review in the larger markets balanced against the growth of emerging markets.

The PV industry has gone from boom to bust and back to boom within a cycle of less than two years from the downturn in Spain late in 2008 to the current surge in Germany. On that basis, few would project stability over the next five years. The fundamental problem is the continued dependence of the industry on market incentives. Increasingly, their cost is becoming a "political hot potato" when programs overshoot their planned scale.

PV policy outlook is tightening

The specter of further cutbacks in incentive levels in major markets now hangs over the PV industry some 21 months on from the start of the debacle that has turned the Spanish market from leader to laggard. The macro economic climate has also changed markedly over that period. The banking crisis that coincided with the Spanish PV market downturn has turned into a broader economic malaise.

Current forecasts indicate the new mechanism of tariff adjustment in Germany will be effective over the 2011-to-2012 period in subduing the German market. Despite this, there remains upside potential in 2011.

The European outlook of tightening policy as governments seek to reduce the economic burden of their national incentive programs will sustain pressure for continued price reduction beyond the short-term tightening around mid-2010.

Turner added, "Exposure to individual country markets remains a high risk strategy. The policy risks are simply too great and downstream solar companies need to look for a geographical portfolio that balances materiality and growth to secure their long-term position."

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!