Imec welcomes new research partners to its GaN research program

July 13, 2010
Micron Technology, Applied Materials, and Ultratech have all joined the Imec industrial affiliation program (IIAP) on gallium nitride-on-silicon (GaN-on-Si) technology.

Leuven, Belgium--Micron Technology (Boise ID), Applied Materials (Santa Clara, CA), and Ultratech (San Jose, CA) have all joined the Imec industrial affiliation program (IIAP) on gallium nitride-on-silicon (GaN-on-Si) technology. The multipartner R&D program focuses on the development of GaN-on-Si process and equipment technologies for manufacturing solid-state lighting (LEDs) and other GaN devices on 8 in. Si wafers.

Large Si cheaper, more efficient than small sapphire
Today, state-of-the-art GaN LED manufacturing processes are typically performed on expensive 4 in. sapphire substrates. By depositing GaN material on 8 in. Si substrates, the productivity of GaN-based device manufacturing can be significantly increased. Imec's GaN-on-Si program is utilizing an Applied Materials mainframe to develop 8 in. GaN-on-Si technology that is compatible with the CMOS fab (fabrication facility) infrastructure. This can further enhance productivity and result in lowering device cost.

Micron Technology, Applied Materials, and Ultratech will actively participate in the IIAP at Imec in Leuven, Belgium. This on-site participation enables the partner companies to have early access to next-generation LED and power-electronics processes, equipment, and technologies.

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!