IR imaging: IQE acquires Galaxy Semiconductors

Oct. 6, 2010
IQE (AIM: IQE), which supplies semiconductor wafers for making infrared (IR) optical devices, has acquired Galaxy Compound Semiconductors (Spokane, WA), a specialist manufacturer of antimony substrates used in IR technology.

Cardiff, Wales--IQE (AIM: IQE), which supplies semiconductor wafers for making infrared (IR) optical devices such as laser diodes, detectors, and thermophotovoltaic cells, has acquired Galaxy Compound Semiconductors (Spokane, WA), a specialist manufacturer of antimonide substrates used in IR technology for commercial and military applications, for up to $14.15 million in cash.

IQE will also place 65 million shares to raise £20.8 million gross to fund the acquisition, selectively expand IQE's manufacturing capacity, repay debt, and strengthen the balance sheet. IQE will be retaining the Galaxy management team and key technical personnel following the acquisition.. IQE intends to support the expansion of Galaxy by providing $1 million of capital expenditure in 2011.

Substrates for many uses

Galaxy was established in 1999; its key products are indium antimonide (InSb) and gallium antimonide (GaSb) substrates, materials used in thermal-imaging cameras, forward-looking IR for navigation through darkness, IR homing missile guidance, detection of heat sources, magneto resistance, and biomedical imaging.

Following the acquisition, IQE will be able to provide IR materials from independent manufacturing facilities at Spokane, WA and at IQE's Wafer Technology operation in Milton Keynes, England.

IQE already owns NanoGaN (Bath, England), which specializes in gallium nitride substrates for blue and green laser diodes and LEDs; NanoGaN has patented a nanocolumn technology for improving the properties of the substrates.

Follow us on Twitter

Subscribe now to Laser Focus World magazine; it’s free!

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Electroplating 3D Printed Parts

Jan. 24, 2025
In this blog post, you'll learn about plating methods to enhance the engineering performance of resin micro 3D printed parts.

Hexapod 6-DOF Active Optical Alignment Micro-Robots - Enablers for Advanced Camera Manufacturing

Dec. 18, 2024
Optics and camera manufacturing benefits from the flexibility of 6-Axis hexapod active optical alignment robots and advanced motion control software

Laser Assisted Wafer Slicing with 3DOF Motion Stages

Dec. 18, 2024
Granite-based high-performance 3-DOF air bearing nanopositioning stages provide ultra-high accuracy and reliability in semiconductor & laser processing applications.

Steering Light: What is the Difference Between 2-Axis Galvo Scanners and Single Mirror 2-Axis Scanners

Dec. 18, 2024
Advantages and limitations of different 2-axis light steering methods: Piezo steering mirrors, voice-coil mirrors, galvos, gimbal mounts, and kinematic mounts.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!