Crystal IS receives $5M DARPA award for germicidal UV LEDs

Dec. 8, 2010
Green Island, NY--Crystal IS was awarded $5 million dollars by DARPA to develop LEDs operating below 275 nm for use in water sterilization and numerous other applications.

Green Island, NY--Crystal IS, developer of ultraviolet C (short wave) light-emitting diodes (UVC LEDs), announced it has been awarded $5 million dollars by the Defense Advanced Research Projects Agency (DARPA). The goal of the program is the development of efficient LEDs operating below 275 nm for use in water sterilization and numerous other applications of significant interest to the Department of Defense.

"DARPA selected us for this award based upon the performance of our existing 265nm LEDs that leverage our proprietary aluminum nitride (AlN) substrate technology," said Steven Berger, CEO of Crystal IS. "With the tremendous help provided by DARPA, we believe we will accelerate the development cycle and bring bright, efficient, and long lifetime UVC LEDs to market sooner."

The development will take place at the Crystal IS facility in Green Island, NY and will run in parallel with the company’s recently announced effort to produce large diameter AlN substrates.

"To make the project as successful as possible we have assembled a group of expert collaborators," said Leo Schowalter, CTO and founder of Crystal IS. "These include industrial and university partners and a Cooperative Research Agreement with the Army Research Laboratory, administered by Dr. Wraback. Combined with our own resources this truly represents a world class team."

SOURCE: Crystal IS; www.crystal-is.com/press.cfm/newsitem/86370

Subscribe now to Laser Focus World magazine; It’s free!

Follow us on Twitter

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!