Improved fabrication method for kesterite thin-film solar cells may widen their use

March 11, 2011
Thin-film solar cells made from copper-zinc-tin-chalcogenide kesterites are not only efficient (up to about 10%), but low in cost too.

Luxembourg City, Luxembourg--Thin-film solar cells made from copper-zinc-tin-chalcogenide kesterites are not only efficient (up to about 10%), but low in cost too. This is because all the raw materials needed to fabricate them are cheap and abundant.

One barrier to the wider use of these kesterites for thin-film photovoltaics is unwanted loss of tin from the thin film during fabrication at elevated temperatures, which ruins the ability to precisely control the film composition and homogeneity.

Simpler precursor film

Researchers at the Université du Luxembourg have overcome this problem by learning more about the reactions occurring during formation of the thin-film material.1 As an added benefit, they have figured out how to begin the manufacturing process with a precursor film of only copper and zinc, rather than a film containing all four materials. This allows the addition of the other materials during fabrication to be simplified, as material proportions become much easier to monitor.

"With this first success, we are now able to understand the further limitations of these solar cells," says Susanne Siebentritt, head of the Laboratory for Photovoltaics. "This will help us to improve the efficiency further."

The Laboratory for Photovoltaics of the University of Luxembourg is a group of researchers developing new materials and processes for solar cells. The laboratory focuses also on furthering the physical understanding of the materials and interfaces involved in these solar cells.

REFERENCE:

1. Alex Redinger et al., J. Am. Chem. Soc., 133 (10), p. 3320 (2011); Publication Date (Web): February 18, 2011.

Follow us on Twitter

Subscribe now to Laser Focus World magazine; it’s free!

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Advancing Neuroscience Using High-Precision 3D Printing

March 7, 2025
Learn how Cold Spring Harbor Laboratory Used High-Precision 3D Printing to Advance Neuroscience Research using 3D Printed Optical Drives.

From Prototyping to Production: How High-Precision 3D Printing is Reinventing Electronics Manufacturing

March 7, 2025
Learn how micro 3D printing is enabling miniaturization. As products get smaller the challenge to manufacture small parts increases.

Sputtered Thin-film Coatings

Feb. 27, 2025
Optical thin-film coatings can be deposited by a variety of methods. Learn about 2 traditional methods and a deposition process called sputtering.

What are Notch Filters?

Feb. 27, 2025
Notch filters are ideal for applications that require nearly complete rejection of a laser line while passing as much non-laser light as possible.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!