InGaN-on-silicon LED from RoseStreet Labs reaches green and longer wavelengths

July 15, 2011
Phoenix, AZ--The world's first long-wavelength light-emitting diode (LED) devices using low-cost silicon wafer substrates were demonstrated by RoseStreet Labs.

Phoenix, AZ--The world's first long-wavelength light-emitting diode (LED) devices using low-cost silicon wafer substrates were demonstrated by RoseStreet Labs. The company says its technology will find a home in the rapidly growing global LED lighting market where energy efficiency, low cost, and miniaturization are critical product characteristics. The technology, which enables green and longer-wavelength LEDs out to 575 nm, is a significant milestone considering that such longer-wavelength nitride-based LEDs have, until now, been challenging to fabricate compared to blue and ultraviolet (UV) LEDs due to decreasing quantum efficiencies.

The RoseStreet Labs (RSL) LEDs are based on the company's proprietary thin-film indium gallium nitride (InGaN) on silicon technology already used for high-efficiency photovoltaic (PV) applications and power devices. The LED devices are fabricated utilizing commercial-scale deposition tools at RSL's Nitride Research Center in Phoenix, AZ; the silicon substrates have a substantial cost advantage over the more traditional sapphire or silicon-carbide substrates typically used in LED fabrication.

RSL plans to eventually package the green and longer-wavelength LEDs through its sister company, FlipChip International (FCI; www.flipchip.com). FCI has extensive experience in packaging semiconductor power devices.

RSL scientists have also demonstrated initial tunability of this technology to multi-color and white-light spectrums. RSL believes this technology can be commercialized in 2-3 years with migration to 200 mm silicon substrates.

Bob Forcier, CEO of RSL, said, "These longer wavelength and Green LED breakthrough devices fit perfectly into RSL's roadmap for disruptive energy innovation at all levels on a global scale and leverages its GaN and InGaN on Silicon investments."

SOURCE: RoseStreet Labs; www.rosestreetlabs.com/RSL%20LED%20Press%20Release%20F.pdf

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!