Silicon photonics light source from Fujitsu shrinks transceivers and CPU interconnects

Sept. 28, 2011
Kawasaki, Japan--A silicon photonics light sources that uses ring resonators and a semiconductor optical amplifier dramatically shrinks transceiver size.

Kawasaki, Japan--A compact silicon photonics light source to be integrated in an optical transceiver has been developed by Fujitsu Laboratories Limited. The new design introduces mechanism that automatically keeps the wavelength of the light source and the operating wavelength of the optical modulator in sync, allowing the device to be smaller and more energy efficient. In addition to shrinking the size of communications transceiver components, these small light sources could be mounted directly in computer central processing units (CPUs) to create high-density optical interconnects between CPUs for exaflop-class supercomputers and high-speed, high-end servers.

The Fujitsu light source is comprised of a silicon mirror and a semiconductor optical amplifier. The silicon mirror is itself composed of a ring resonator and Bragg reflector that control the lasing wavelength. The sizes of the ring resonators introduced into both the light source and the optical modulator are exactly the same, so that shifts in the lasing wavelength of the light source and the modulator caused by CPU heating should match, eliminating the need for thermal control and reducing the transceiver footprint.

The transmitter component can be shrunk to less than 1 mm in length and an array of these components should be able to produce an optical transceiver for a large-capacity optical interconnect that is small enough to be mounted on a CPU module.

SOURCE: Fujitsu Laboratories; www.fujitsu.com/global/news/pr/archives/month/2011/20110916-01.html

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!