Northrop Grumman wavelength-stabilized laser diode arrays produce 0.5 nm spectral width

Sept. 13, 2011
A new process has been developed for building high-power laser diode arrays with narrow emission spectra by adding volume Bragg gratings during the packaging process.

A new process has been developed for building high-power laser diode arrays with narrow emission spectra by adding volume Bragg gratings during the packaging process. These arrays produce a spectral width of approximately 0.5 nm (FWHM), and are available with output powers ranging from watts to kilowatts.
Northrop Grumman – Cutting Edge Optronics
St. Charles, MO

www.as.northropgrumman.com/ceolaser

More Products

-----

PRESS RELEASE

kW-Class, Wavelength Stabilized Laser Diode Arrays
Northrop Grumman - Cutting Edge Optronics

Northrop Grumman Cutting Edge Optronics has developed a process for building high-power laser diode arrays with narrow emission spectra by adding Volume Bragg Gratings during the packaging process. These arrays produce a spectral width of approximately 0.5 nm (FWHM), and are available with output powers ranging from Watts to kilowatts.

Potential Uses
There are many instances of laser media that could benefit from a diode laser pump source with a narrow wavelength spectrum. One prominent example is shown in Figure 1, which shows the absorption spectrum of Nd:YAG over the wavelength range of 780-900nm. Perhaps the most common pump wavelength for Nd:YAG lasers is nominally 808nm. There is also a neighboring peak at approximately 805nm that creates an effective absorption width of 5.5nm and is ideally-suited for pumping by standard laser diode arrays. However, there are technical advantages associated with pumping at higher wavelengths. Most notably, the lower quantum defect associated with pumping at higher wavelengths results in a weaker thermal lens and lower depolarization losses. As a result, pumping Nd:YAG at 869 or 885nm is an attractive alternative in many laser designs. However, the absorption peaks at these wavelengths are significantly narrower (~ 1nm and ~ 3nm respectively), and subsequently benefit from pump diodes with narrow emission spectra. Similar features are observed in other Nd-doped laser crystals, such as Nd:YLF and Nd:YVO4.

To view the full technical note, please visit http://www.as.northropgrumman.com/businessventures/ceolaser/technical_papers/assets/TechNote17_wavelength_stabiliz.pdf.

-----

Follow us on Twitter

Follow OptoIQ on your iPhone; download the free app here.

Subscribe now to Laser Focus World magazine; it's free!

Sponsored Recommendations

March 31, 2025
Enhance your remote sensing capabilities with Chroma's precision-engineered optical filters, designed for applications such as environmental monitoring, geospatial mapping, and...
March 31, 2025
Designed for compatibility with a wide range of systems, Chroma's UV filters are engineered to feature high transmission, superior out-of-band blocking, steep edge transitions...
March 31, 2025
Discover strategies to balance component performance and system design, reducing development time and costs while maximizing efficiency.
March 31, 2025
Explore the essential role of optical filters in enhancing Raman spectroscopy measurements including the various filter types and their applications in improving signal-to-noise...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!