3S Photonics’ laser diodes on their way to Mars

Dec. 6, 2011
Nozay, France--Laser diodes made by 3S Photonics Group, a manufacturer of optical and optoelectronic components for telecommunications networks, are now en route to Mars as part of NASA’s Mars Science Laboratory (MSL) mission.
(Image: NASA)
The MSL rover, Curiosity, is shown inside the Spacecraft Assembly Facility at the Jet Propulsion Laboratory (Pasadena, CA). The ChemCam is at the top of the mast just left of center.
The MSL rover, Curiosity, is shown inside the Spacecraft Assembly Facility at the Jet Propulsion Laboratory (Pasadena, CA). The ChemCam is at the top of the mast just left of center.

Nozay, France--Laser diodes made by 3S Photonics Group, a manufacturer of optical and optoelectronic components for telecommunications networks, are now en route to Mars as part of NASA’s Mars Science Laboratory (MSL) mission. Kicked off by a successful November 26 launch, the MSL aims to land and operate the Curiosity rover on the surface of Mars to find out if the Red Planet has ever been inhabited. The MSL is well-equipped with photonic instruments, including a number of cameras and a UV sensor.

CNES, the French Space Agency, in partnership with the Quantel group and the French Space Research Institute (CEST; Toulouse) designed and built two out of the ten instruments on board the Rover Curiosity, including the ChemCam (chemistry camera).

ChemCam analyzes the rocks and the ground up to 9 m away from the rover using laser-induced breakdown spectroscopy (LIBS). Laser pulses cause the material under test to melt and plasma to emerge, which is detected from a distance via UV-visible spectroscopy. Based on the information retrieved from ChemCam, the Rover can reposition itself near to any rock in order to carry out further analysis.

3S Photonics’ laser diodes were integrated into the ChemCam in 2004 and 2005.

Sponsored Recommendations

March 31, 2025
Enhance your remote sensing capabilities with Chroma's precision-engineered optical filters, designed for applications such as environmental monitoring, geospatial mapping, and...
March 31, 2025
Designed for compatibility with a wide range of systems, Chroma's UV filters are engineered to feature high transmission, superior out-of-band blocking, steep edge transitions...
March 31, 2025
Discover strategies to balance component performance and system design, reducing development time and costs while maximizing efficiency.
March 31, 2025
Explore the essential role of optical filters in enhancing Raman spectroscopy measurements including the various filter types and their applications in improving signal-to-noise...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!