Sunflower-inspired biomimetics improve concentrated solar power efficiency

Jan. 12, 2012
Cambridge, MA--Researchers at MIT in collaboration with RWTH Aachen University have developed a nature-inspired concentrated solar power (CSP) design that reduces the amount of land required to build a CSP plant.

Cambridge, MA--In a surprising application of biomimetics, researchers at the Massachusetts Institute of Technology (MIT) in collaboration with RWTH Aachen University (Aachen, Germany) have developed a concentrated solar power (CSP) design that reduces the amount of land required to build a CSP plant, while increasing the amount of sunlight its mirrors collect. By rearranging the mirrors, or heliostats, in a pattern similar to the spirals on the face of a sunflower, they could reduce the CSP footprint by 20% and increase its potential energy generation. The pattern apparently minimizes heliostat shading and blocking by neighboring mirrors. The research is published in the journal Solar Energy, and the researchers have filed for patent protection.

Typical CSP plants have mirrors arranged around the central tower in concentric circles. The spacing between mirrors is similar to the seats in a movie theater, staggered so that every other row is aligned. However, this pattern results in higher-than-necessary shadowing and blocking throughout the day, reducing the reflection of light from mirrors to the tower.

The lab of Alexander Mitsos and the Aachen collaborators developed a computational model to evaluate the efficiency of heliostat layouts, dividing each mirror into discrete sections and calculating the amount of light each section reflects at any given moment. The researchers then tested the model on an existing commercial-scale CSP plant and found that the CSP plant experiences a significant amount of shading and blocking each day despite the staggered layout of its mirrors. The team then tinkered with the pattern of heliostats, using numerical optimization to first bring the fanned-out layout closer together, and found that the resulting patterns had some spiral elements similar to layouts in nature.

Knowing that the florets of a sunflower are arranged in a spiraling pattern known as a Fermat spiral that appears in many natural objects and has long fascinated mathematicians, the researchers devised a spiral field with its heliostats rearranged to resemble a sunflower, with each mirror angled about 137 degrees relative to its neighbor. The numerically optimized layout takes up 20% less space than the original layout and reduces shading and blocking and increases total efficiency.

"Concentrated solar thermal energy needs huge areas," Mitsos says. "If we're talking about going to 100 percent or even 10 percent renewables, we will need huge areas, so we better use them efficiently."

Frank Burkholder, an engineer with the National Renewable Energy Laboratory, says for expensive heliostat fields, Mitsos' model could potentially generate the same annual energy by taking up "far less" land area.

SOURCE: MIT; http://web.mit.edu/newsoffice/2012/sunflower-concentrated-solar-0111.html

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

Hexapod 6-DOF Active Optical Alignment Micro-Robots - Enablers for Advanced Camera Manufacturing

Dec. 18, 2024
Optics and camera manufacturing benefits from the flexibility of 6-Axis hexapod active optical alignment robots and advanced motion control software

Laser Assisted Wafer Slicing with 3DOF Motion Stages

Dec. 18, 2024
Granite-based high-performance 3-DOF air bearing nanopositioning stages provide ultra-high accuracy and reliability in semiconductor & laser processing applications.

Free Space Optical Communication

Dec. 18, 2024
Fast Steering Mirrors (FSM) provide fine steering precision to support the Future of Laser Based Communication with LEO Satellites

White Paper: Improving Photonic Alignment

Dec. 18, 2024
Discover how PI's FMPA Photonic Alignment Technology revolutionized the photonics industry, enabling faster and more economical testing at the wafer level. By reducing alignment...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!