Electrical signals dictate optical properties of metamaterial

March 19, 2013
Southampton, England--Researchers at the University of Southampton's Optoelectronics Research Centre (ORC) have created a metamaterial with optical properties that can be controlled by electric signals.

Southampton, England--Researchers at the University of Southampton's Optoelectronics Research Centre (ORC) have created a metamaterial with optical properties that can be controlled by electric signals.1

The metamaterial contains nanoscale parts, called plasmonic metamolecules, that are supported by nanosized strings of silicon nitride. Applying an electric field of a few volts allows the strings to be driven in sync at megahertz frequencies; the result is a reconfiguration of the metamolecules, which changes the transmission and reflection spectra of the metamaterial.

"We have found a fast and reliable way of coordinating the motion of thousands of metamaterial building blocks," says Eric Plum, Research Lecturer at the ORC. "We shift them by distances smaller than the diameter of a human hair. These minute rearrangements are sufficient to radically change the transmission and reflection characteristics of the metamaterial. We do this by engaging the same force that sticks a small piece of paper to a comb after brushing. In essence, we dictate the movement of metamaterial building blocks with electrical signals, and we can do this very fast."

Metamaterials research has grown rapidly in the past decade. The University's Centre for Photonic Metamaterials is supported by the Engineering and Physical Sciences Research Council and is at the forefront of this development.

REFERENCE:

1. J. Y. Ou et al., Nature Nanotechnology (2013) http://dx.doi.org/10.1038/NNANO.2013.25

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!