5D crystal could enable hundreds-of-terabytes data storage with unlimited lifetime

July 22, 2013
Southampton, England--University of Southampton scientists have demonstrated the recording and retrieval processes of five dimensional (5D) digital data by femtosecond laser writing.

Southampton, England--University of Southampton scientists, using nanostructured glass, have for the first time experimentally demonstrated the recording and retrieval processes of five dimensional (5D) digital data by femtosecond laser writing. The optical storage allows unprecedented parameters including 360 TB/disc data capacity, thermal stability up to 1800 degrees Fahrenheit, and practically unlimited lifetime.

Coined as the 'Superman' memory crystal, as the glass memory has been compared to the "memory crystals" used in the Superman films, the data is recorded via self-assembled nanostructures created in fused quartz, which is able to store vast quantities of data for over a million years. The information encoding is realized in five dimensions: the size and orientation in addition to the three dimensional position of these nanostructures.

A 300 kb digital copy of a text file was successfully recorded in 5D using an ultrafast laser; the file was written in three layers of nanostructured dots separated by five micrometers. The self-assembled nanostructures change the way light travels through glass, modifying polarization of light that can then be read by combination of optical microscope and a polarizer, similar to that found in Polaroid sunglasses.

The research is led by Jingyu Zhang from the University's Optoelectronics Research Centre (ORC) and conducted under a joint project with Eindhoven University of Technology. "We are developing a very stable and safe form of portable memory using glass, which could be highly useful for organisations with big archives. At the moment companies have to back up their archives every five to ten years because hard-drive memory has a relatively short lifespan," says Zhang.

The Physical Optics group from the ORC presented their paper at the Conference on Lasers and Electro-Optics (CLEO 2013) in San Jose, CA. The work was done in the framework of the EU project Femtoprint.

Professor Peter Kazansky, the ORC’s group supervisor, adds, "It is thrilling to think that we have created the first document which will likely survive the human race. This technology can secure the last evidence of civilisation: all we've learnt will not be forgotten."

The team is now looking for industry partners to commercialize this new technology.

SOURCE: University of Southampton; http://www.southampton.ac.uk/mediacentre/news/2013/jul/13_131.shtml

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!