Highly flexible OLED light source has 10 micron bend radius

July 31, 2013
Tokyo, Japan and Linz, Austria--A group led by Takao Someya, professor at the School of Engineering at the University of Tokyo, has developed a thin-sheet organic LED (OLED) light source that functions even after being crumpled.

Tokyo, Japan and Linz, Austria--A group led by Takao Someya, professor at the School of Engineering at the University of Tokyo, has developed a thin-sheet organic LED (OLED) light source that functions even after being crumpled. The minimum bending radius and brightness of the sheet are 10 µm and 100cd/m2, respectively; the mass and thickness are 3g/m2 and 2 µm.

The same group also announced a thin-film pressure-sensor sheet that functions even after being crumpled and has a mass of only 3g/m2, which is about 1/27 that of ordinary paper. For the pressure-sensor sheet, it succeeded in forming an array of organic thin-film transistors (TFTs) that form an electronic circuit on the film substrate.

In 2011, the group developed a thin, light OLED photovoltaic (PV) cell that can be used as an optical sensor.

Three devices together can form medical sensor

These three devices (organic TFT as a component of an electronic circuit, optical sensor, and light-emitting device) together form all the elements necessary for medical and health-care sensors that can be integrated on a single ultrathin sheet.

For collecting biological information such as the amount of oxygen in blood, devices made by combining a light source and light-sensitive detector are widely used. The research group expects that the new OLED light source will be used for medical and health-care wearable devices that use light as a probe to collect a variety of biological information.

To directly form OLED elements on a 1.4-µm-thick plastic film substrate, which tends to be damaged in the manufacturing process, the group eliminated indium tin oxide (ITO) electrodes, which require a high-energy plasma film-forming process. Instead, it used a conductive polymer (PEDOT:PSS) that forms a film via a low-temperature, low-energy spin-coating process.

The group conducted the research in cooperation with researchers at Johannes Kepler University of Linz (Linz, Austria). The results were published on July 28, 2013 in the online version of Nature Photonics.

Sources:

http://techon.nikkeibp.co.jp/english/NEWS_EN/20130730/295194/
http://techon.nikkeibp.co.jp/english/NEWS_EN/20130726/294563/

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Advancing Neuroscience Using High-Precision 3D Printing

March 7, 2025
Learn how Cold Spring Harbor Laboratory Used High-Precision 3D Printing to Advance Neuroscience Research using 3D Printed Optical Drives.

From Prototyping to Production: How High-Precision 3D Printing is Reinventing Electronics Manufacturing

March 7, 2025
Learn how micro 3D printing is enabling miniaturization. As products get smaller the challenge to manufacture small parts increases.

Sputtered Thin-film Coatings

Feb. 27, 2025
Optical thin-film coatings can be deposited by a variety of methods. Learn about 2 traditional methods and a deposition process called sputtering.

What are Notch Filters?

Feb. 27, 2025
Notch filters are ideal for applications that require nearly complete rejection of a laser line while passing as much non-laser light as possible.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!