Health Physics releases safety study on laser-illuminated projectors

Feb. 27, 2014
San Jose, CA--The LIPA released news that the journal Health Physics found that ocular hazards from projectors are similar whether their illumination source is laser-based or lamp-based.

San Jose, CA--The Laser Illuminated Projector Association (LIPA) released news that the peer-reviewed radiation safety journal Health Physics (Lexington, SC) published a paper entitled "Optical Safety of Comparative Theater Projectors" in their March 2014 edition. The safety study found that ocular hazards from projectorsprofessional to consumer-grade systemsare similar whether their illumination source is laser-based or lamp-based.

The study points out that laser-illuminated projector emissions hold no resemblance to the optical hazards of collimated laser beams used in light shows and, therefore, laser illuminated projector standards and regulations should be similar to those for lamp-based projectors, rather than those applied to laser light shows. The study was done to ensure that state-of-the-art laser illuminated projectors (LIPs) posed no danger to theater operators and movie-goers as they replace lamp-based systems in theaters and venues worldwide.

"Laser illuminated projectors are expected to provide many benefits to theaters operators with longer lifetimes, cooler and less-expensive operation, more uniform and brighter pictures, delivering a more enjoyable experience for movie-goers, particularly with respect to 3D films," said Heidi Hoffman, managing director of LIPA. "Similar advantages will come to large-venue operators of conference facilities, traffic control facility operators, and anywhere images are projected onto screens or surfaces."

The authors are radiation and laser safety experts David Sliney, a leading medical physicist; David Schnuelle, Dolby Laboratories; Casey Stack, Laser Compliance; and Jay Parkinson, Phoenix Laser Safety. Measurements were taken of the irradiance and source size, as well as the ultraviolet and infrared emissions of the systems studied. The projectors spanned a wide variation in terms of lumen output, illumination method, and beam angles and the beams of light were measured at distances ranging from 0.1 to 4.0 m and for a duration of 0.25 seconds.

Health Physics is the official journal of the Health Physics Society (http://hps.org) and was first published in 1958. The journal's peer-reviewed articles cover the many advances in medicinal and industry research involving radioactive materials and radiation machines for health physicists, nuclear chemists, and physicians, and others with an interest in nuclear and radiological medicine and the safety of these products. To access the article, go to http://journals.lww.com/health-physics/Abstract/2014/03000/Optical_Safety_of_Comparative_Theater_Projectors.2.aspx.

SOURCE: LIPA; http://lipainfo.org/health-physics-releases-scientific-findings-on-safety-of-new-laser-illuminated-projectors/

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!