Polychiral design doubles efficiency of carbon nanotube solar cells

Sept. 5, 2014
A research team led by Mark Hersam, professor of materials science and engineering at the McCormick School of Engineering at Northwestern University has created a new type of CNT solar cell that is twice as efficient as its predecessors.

Although carbon nanotubes (CNTs) are lighter, more flexible, and cheaper than conventional solar-cell materials, their promise in photovoltaic (PV) applications has stalled as CNTs have shown to be more inefficient in converting sunlight into electricity than other methods. But a research team led by Mark Hersam, professor of materials science and engineering and the Bette and Neison Harris Chair of Teaching Excellence at the McCormick School of Engineering at Northwestern University (Evanston, IL) has created a new type of CNT solar cell that is twice as efficient as its predecessors. It is also the first CNT solar cell to have its performance certified by the National Renewable Energy Laboratory (NREL).

RELATED ARTICLE: Nanostructured carbon nanotubes boost solar-cell efficiency

"The field had been hovering around 1 percent efficiency for about a decade; it had really plateaued," Hersam said. "But we've been able to increase it to over 3 percent. It's a significant jump." The research is described in the article "Polychiral Semiconducting Carbon Nanotube-Fullerene Solar Cells" in the August 7 issue of Nano Letters.

The secret lies in the CNT's chirality, which is a combination of the tubes' diameter and twist. When a thin sheet of carbon is rolled into a nanotube, several hundred different chiralities are possible. In the past, researchers tended to choose one particular chirality with good semiconducting properties and build an entire solar cell out of that one.

"The problem is that each nanotube chirality only absorbs a narrow range of optical wavelengths," Hersam said. "If you make a solar cell out of a single chirality carbon nanotube, you basically throw away most of the solar light." Hersam's team made a mixture of polychiral, or multiple chirality, semiconducting nanotubes. This maximized the amount of photocurrent produced by absorbing a broader range of solar-spectrum wavelengths. The cells significantly absorbed near-infrared wavelengths, a range that has been inaccessible to many leading thin-film technologies.

While this is major progress for CNT solar cells, they still lag behind other materials in efficiency. Silicon, for example, can be 15-20% efficient, but it is more expensive to manufacture. "If you look at our performance, there's certainly a big jump," Hersam said. "But there's more work to be done. We still have to advance this technology by a factor of three to five."

Hersam said the next step is to create polychiral CNT solar cells that have multiple layers. Each layer would be optimized for a particular portion of the solar spectrum and, thus, absorb more light. He said they might also incorporate other materials, such as organic or inorganic semiconductors, to complement CNTs.

"What we'd like to do is absorb every photon from the sun and convert it into electricity," he said. "In other words, we'd like to have a solar cell that has an absorption spectrum perfectly matching solar light. We’re on a path toward that goal."

SOURCE: Northwestern University; http://www.mccormick.northwestern.edu/news/articles/2014/08/breakthrough-for-carbon-nanotube-solar-cells.html

Sponsored Recommendations

Advancing Neuroscience Using High-Precision 3D Printing

March 7, 2025
Learn how Cold Spring Harbor Laboratory Used High-Precision 3D Printing to Advance Neuroscience Research using 3D Printed Optical Drives.

From Prototyping to Production: How High-Precision 3D Printing is Reinventing Electronics Manufacturing

March 7, 2025
Learn how micro 3D printing is enabling miniaturization. As products get smaller the challenge to manufacture small parts increases.

Sputtered Thin-film Coatings

Feb. 27, 2025
Optical thin-film coatings can be deposited by a variety of methods. Learn about 2 traditional methods and a deposition process called sputtering.

What are Notch Filters?

Feb. 27, 2025
Notch filters are ideal for applications that require nearly complete rejection of a laser line while passing as much non-laser light as possible.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!