Next-gen optical fiber trial successful; Infinera PIC extends its reach

March 23, 2015
Infinera and BICS completed an extended laboratory trial of QPSK, 8 QAM, and 16QAM transmission over OFS Terawave large area/low loss (LA/LL) fiber that is optimized for terrestrial cables.

Transport optical network company Infinera (Sunnyvale, CA) and communications carrier services company BICS (Brussels, Belgium) successfully completed an extended laboratory trial of quadrature phase shift keying (QPSK), 8 quadrature amplitude modulation (QAM), and 16QAM transmission over OFS (Norcross, GA) Terawave [trade mark] large area/low loss (LA/LL) fiber that is optimized for terrestrial cables. The trial included a range of advanced FlexCoherent modulation features that will continue to drive capacity and reach for the Intelligent Transport Network using the FlexCoherent Processor combined with photonic integrated circuit (PIC) technology.

RELATED ARTICLE: PIC-based 500 Gbps coherent modem thwarts real-time PMD

This trial shows the dramatic improvement in optical reach and capacity that can be expected as these new fibers are deployed in the next generation of terrestrial and submarine fiber links. LA/LL fibers are being deployed in a handful of submarine cables now and will likely be the technology of choice for future submarine cable builds. The deployment of new LA/LL fiber in terrestrial applications could be delayed because of the large base of existing fiber, but there are early examples of such deployments. Existing fiber types typically have a much lower optical performance compared to LA/LL fiber.

High order modulations, such as 16QAM, promise to deliver double the capacity of QPSK – the de facto 100Gb/s modulation – at the expense of 80 percent reduction in reach, using existing fiber types. This makes 8QAM a promising option over existing fibers for both submarine and terrestrial applications. In a recent submarine trial performed on existing fiber, 8QAM delivered a reach of over 2,200 km while increasing capacity by 50 percent. When the same test was performed on the new LA/LL fiber, 8QAM demonstrated an optical reach up to 7,400km with a 50 percent increase in fiber capacity.

Steve Grubb, Infinera Fellow, and the architect behind the trial summarized the findings. "With the optical reach we achieved using this new type of LA/LL fiber we could envisage a future in which PM-QPSK could be used to close trans-Pacific links, PM-8QAM could cross the Atlantic, and PM-16QAM could span a European backbone. This would enable between 50 percent and 100 percent increase in new submarine or terrestrial cable capacity."

"This trial was extremely useful for our future network planning process," said Eric Loos, Senior Product Manager Capacity & IP at BICS. "It's clear to us that many of the trials of 16QAM in the market today are performed on these new fiber types – because they dramatically improve the optical reach. When it comes to existing fiber types in the terrestrial applications, like SMF or LEAF®, it's clear that 16QAM can be useful at the shorter reach end of the scale, especially where no optical protection will be used. In contrast PM-8QAM seems to offer a sweet spot for longer metro, regional and even long haul distances, and could give us enough reach to include optical protection. 8QAM delivers a 50 percent capacity boost compared to QPSK, and that's going to be extremely useful for service providers facing the unprecedented demand increase from Cloud-based services."

SOURCE: Infinera; http://www.infinera.com/j7/servlet/NewsItem?newsItemID=445

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

Brain Computer Interface (BCI) electrode manufacturing

Jan. 31, 2025
Learn how an industry-leading Brain Computer Interface Electrode (BCI) manufacturer used precision laser micromachining to produce high-density neural microelectrode arrays.

Electro-Optic Sensor and System Performance Verification with Motion Systems

Jan. 31, 2025
To learn how to use motion control equipment for electro-optic sensor testing, click here to read our whitepaper!

How nanopositioning helped achieve fusion ignition

Jan. 31, 2025
In December 2022, the Lawrence Livermore National Laboratory's National Ignition Facility (NIF) achieved fusion ignition. Learn how Aerotech nanopositioning contributed to this...

Nanometer Scale Industrial Automation for Optical Device Manufacturing

Jan. 31, 2025
In optical device manufacturing, choosing automation technologies at the R&D level that are also suitable for production environments is critical to bringing new devices to market...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!