Materion to manufacture largest filters yet for LSST astronomical mapping

April 28, 2016
Materion Precision Optics will begin the first phase of manufacturing six of the world's largest astronomical filters.

Materion Precision Optics (Mayfield Heights, OH), a Materion Corporation (NYSE:MTRN) business, is set to begin the first phase of manufacturing six of the world's largest precision astronomical filters to date for the new Large Synoptic Survey Telescope (LSST). The LSST is a partnership between public and private organizations, including the U.S. National Science Foundation and the U.S. Department of Energy. The curved filters, 80 cm in diameter and weighing between 15-30 kg, will be installed in the Telescope's 3.2 Gpixel digital camera for a 10-year period to survey and map tens of billions of stars and galaxies.

RELATED ARTICLE: 3.2 gigapixel camera for LSST gets critical approval from DOE

"Only a few years ago a large filter would have been around 10 cm in diameter. We have repeatedly scaled up to meet the astronomy community's increasing requirement for larger filters," said Michael Newell, President, Materion Precision Optics. "The LSST filters will be the largest we have built and our large optics facility in Westford, Massachusetts is well suited for the task as it was designed specifically for filters of this size."

The coating design and process development phase of the large astronomical filters is being undertaken for the Lawrence Livermore National Laboratory in the Class 1000 cleanroom of the large optics facility. The filters will contain a surface coating uniformity of well under 1% and cover spectral wavelengths from ultraviolet to near infrared. The facility will also allow for spectral performance testing of the LSST filters in an operation beam simulation using Materion's newly developed metrology instrument.

Materion's astronomical filters will make it possible for the LSST to document a section of the sky every 20 seconds, amounting to more than 800 panoramic images each night off the El Peñón mountain peaks in northern Chile. In total the telescope is expected to produce 200,000 images (1.28 petabytes) each year, capturing sharp images of objects 10 million times fainter than visible to the human eye.

With more than 40 years of experience since its founding as Barr Associates, Materion Precision Optics has produced large filters for Subaru Hyper-Suprime Cam (HSC), 60 cm diameter; DECam, 62 cm diameter; Zwicky Transient Facility (ZTF), 49 x 45 cm; Canada France Hawaii Telescope (CFHT) MegaCam upgrade, 30 cm x 35 cm; and many others.

SOURCE: Materion; http://investor.shareholder.com/materion/releasedetail.cfm?ReleaseID=965576

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!