Optical amplification for large astronomical telescopes could overcome the diffraction limit

July 6, 2016
Stimulated photons produced within a telescope could help surpass diffraction limit by a factor of 10.

In a new paper published in the journal Optics Letters from The Optical Society (OSA), a research team now proposes a way around the diffraction limit of telescopes that could potentially enable even moderately sized telescopes to obtain images with very high angular resolution.1

While the usable angular resolution of ground-based telescopes can be increased using adaptive optics (AO) systems, AO expert Aglaé N. Kellerer from the University of Cambridge (Cambridge, England), says that as telescope sizes increase, the correction becomes increasingly more complex. "In 1989, the first astronomical prototype had 19 correction elements and a 150 Hz sampling rate," she notes. "Current systems have several thousand correction elements and sampling rates above 1000 Hzand this is not the end of the line."

Kellerer and her co-author Erez N. Ribak, Technion–Israel Institute of Technology, Israel, now propose that it may be possible to improve the angular resolution of a telescope beyond the diffraction limit by using a combination of photon amplification and the statistical properties of stimulated photons versus spontaneous photons.

Consider a photon emitted by an astronomical object. Before the photon is actually detected by a given telescope, all that is known of its location is that it exists at some point on an immense spherical wave centered on the astronomical object and extending all the way to the telescope. Once the telescope’s detector records the photon, however, the photon’s pathway is narrowed to within an area constrained by the telescope’s aperture. The Heisenberg uncertainty principle indicates that because the path of the photon is now better known, the corresponding uncertainty in its momentum must increase. This limits the resolution of the telescope.

However, say Kellerer and Ribak, this limit applies only to independent photons; with sets of coherent or entangled photons, the limit can be smaller. "We propose to use photon amplification—stimulated emission—to overcome the diffraction limit in astronomy," she says.

Excited atoms between telescope's aperture and photon detector

Specifically, the researchers propose that excited atoms could be placed between the telescope aperture and its photon detector. When an astronomical photon enters the telescope, it will stimulate the emission of identical photons. "These photons arrive simultaneously on the detector and spread over the diffraction pattern," Kellerer explains. "If the incoming photon stimulates the emission of 100 photons, the precision on the determination of the photon's incoming direction is improved by a factor of 10."

The stimulated emission would be accompanied by spontaneous emission that contributes noise. For that reason, scientists previously had discarded the idea of using photon amplification to improve astronomical imaging. Kellerer and Ribak, however, suggest using only stimulated photon bursts that are above a particular size. Astronomical photons that generate small photon bursts have a larger noise component and are discarded, reducing the overall noise. "This might allow us to overcome the diffraction limit," she says.

One potential downside of the proposed technique is a loss of sensitivity in the images produced. "It is a price to pay," she admits, "but it is reassuring: if we found a means to overcome the diffraction limit at no cost, we would be in contradiction with the Heisenberg uncertainty principle, and we would thus certainly be wrong." (In addition, she notes, the loss of sensitivity can partly be overcome by increased exposure times.)

Possibility for imaging exoplanet surfaces?

Achieving extremely high angular resolution would be beneficial for many astronomical applications, Kellerer says. As one example, she points to recent research by her group that led to the discovery of Earth-like planets around an ultracool dwarf star located 39 light years away. "Even though these planets are close by astronomical standards," she says, "it will be extremely difficult to build telescopes that are sufficiently large, or interferometers that have a sufficiently long baseline, to image their surfaces. This will require a technological breakthrough."

Source: OSA

REFERENCE:

1. Aglaé Kellerer and Erez Ribak, Optics Letters, Vol. 41 Issue 14, p. 3181 (2016); doi: 10.1364/OL.41.003181.

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!