Sony LED-based lawn illumination system spurs grass growth

Oct. 4, 2016
"Brighturf" red and blue LEDs promote photosynthesis, lush suburban lawns.

As noted by Tech-On!, Sony Business Solutions (Tokyo, Japan) recently exhibited an LED-based lighting system that promotes the growth of natural grass at Stadia & Arena Asia Pacific 2016 (Sept 26 to 28, 2016; Yokohama, Japan).

The system, "Brighturf," was developed in collaboration with Kashima Antlers, Shinshu University, Showa Denko, and Sekishin Denki. Sony Business Solutions is a company affiliated with the Sony group that produces broadcasting equipment and commercial-use products.

A previous lawn-growth lighting system used halogen lamps to grow turf grass; however, it generates heat and withers grass in Japan, which is a high-temperature, high-humidity country. The Brighturf is the world's first LED-based lighting system used to grow grass, according to Sony Business Solutions.

The Brighturf emits red (660 nm wavelength) and blue (450 nm wavelength) lights, which are optimal for photosynthesis, from a height of 1.5 m, covering an area of 90m2. It speeds up the growth of grass by six times, says Sony. As a result, it enables turf grass in a shady area to grow as fast as grass in a sunny area, the company says.

Source: http://techon.nikkeibp.co.jp/atclen/news_en/15mk/100300867/

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Advancing Neuroscience Using High-Precision 3D Printing

March 7, 2025
Learn how Cold Spring Harbor Laboratory Used High-Precision 3D Printing to Advance Neuroscience Research using 3D Printed Optical Drives.

From Prototyping to Production: How High-Precision 3D Printing is Reinventing Electronics Manufacturing

March 7, 2025
Learn how micro 3D printing is enabling miniaturization. As products get smaller the challenge to manufacture small parts increases.

Sputtered Thin-film Coatings

Feb. 27, 2025
Optical thin-film coatings can be deposited by a variety of methods. Learn about 2 traditional methods and a deposition process called sputtering.

What are Notch Filters?

Feb. 27, 2025
Notch filters are ideal for applications that require nearly complete rejection of a laser line while passing as much non-laser light as possible.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!