Greatcell awarded $825K Horizon 2020 grant for perovskite solar cell commercialization

Nov. 19, 2017
The successful grant to Greatcell's application aims to commercialize perovskite solar technology.

Greatcell Solar (Queanbeyan, NSW, Australia), provider of solar technologies, was awarded 700,000 euro (about $825,000 dollars) in a European Union Horizon 2020 project known as Apolo. The successful grant to Greatcell's application has occurred through its 100% Italian subsidiary, Greatcell Solar Italy located in Rome, and aims to commercialize perovskite solar technology.

RELATED ARTICLE: Perovskite solar cells recover in the dark

The H2020 project is for innovative development of perovskite solar cell (PSC) technology on flexible substrates and aligns very closely with Greatcell’s existing technology development plan, particularly that being conducted at Solliance in the Netherlands.

Much of the work involved will investigate advanced technology for higher efficiencies, longer life, and improved encapsulation of PSC-enabled flexible substrates, such as metals and polymers. These are all critical in the successful translation of the 3rd generation PSC photovoltaic (PV) technology from the laboratory to the factory and satisfying PV industry accreditation (IEC 61215).

Greatcell has a multi-generational technology development plan with the objective of producing PV technology that generates electricity for as low as 3.5 US cents per kWh or 25 US cents per watt peak (Wp). This is significantly lower than existing, competitive PV technologies.

The H2020 Apolo project also includes the partners: the Alternative Energies and Atomic Energy Commission of France (CEA), École Polytechnique Fédérale De Lausanne (EPFL), University of Rome Tor Vergata and Fraunhofer of Germany.

SOURCE: Greatcell Solar via ASX; http://www.greatcellsolar.com/

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

Advancing Neuroscience Using High-Precision 3D Printing

March 7, 2025
Learn how Cold Spring Harbor Laboratory Used High-Precision 3D Printing to Advance Neuroscience Research using 3D Printed Optical Drives.

From Prototyping to Production: How High-Precision 3D Printing is Reinventing Electronics Manufacturing

March 7, 2025
Learn how micro 3D printing is enabling miniaturization. As products get smaller the challenge to manufacture small parts increases.

Sputtered Thin-film Coatings

Feb. 27, 2025
Optical thin-film coatings can be deposited by a variety of methods. Learn about 2 traditional methods and a deposition process called sputtering.

What are Notch Filters?

Feb. 27, 2025
Notch filters are ideal for applications that require nearly complete rejection of a laser line while passing as much non-laser light as possible.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!