Amorphous silicon is indeed a glass—until you add hydrogen

Sept. 1, 2011
Using scanning tunneling microscopy, researchers at the University of Illinois at Urbana-Champaign (Urbana, IL) have observed the subnanometer structure of amorphous silicon (a-Si) and found that it is indeed a glass—until hydrogen is added.

Using scanning tunneling microscopy, researchers at the University of Illinois at Urbana-Champaign (Urbana, IL) have observed the subnanometer structure of amorphous silicon (a-Si) and found that it is indeed a glass—until hydrogen is added. The finding expands knowledge of the material properties of silicon that could be important to future solar cell and optoelectronic component development.

Unlike the crystalline form of silicon, a-Si has a random, glassy structure well-suited to flexible thin-film solar cells; however, it cannot be manufactured like a glass by rapidly cooling it in its melted state and instead is fabricated through ion implantation or chemical-vapor deposition techniques. For the first time, the researchers were able to observe two-state dynamics in a-Si—a classic characteristic of glass in which clusters of silicon atoms “hop” between two positions forming a semistable structure. And although hydrogen is typically added to a-Si to increase stability and improve performance, it was long assumed that hydrogen had no effect on its random structure. But the imaging also showed that adding hydrogen robs a-Si of its two-state dynamics, inducing crystallization such that a-Si is not completely amorphous; essentially, a-Si shares some—but not all—features of a glass material.

Contact Martin Gruebele at [email protected].

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!