Modified commercial violet laser diode produces superradiant emission

April 3, 2012
A light source that operates via so-called Dicke superradiance has been created by scientists at the University of Cambridge and the PN Lebedev Physical Institute; the two-section gallium nitride (GaN)-based laser diode produces 1.4 ps optical pulses at a 10 MHz repetition rate and a 408 nm wavelength.

A light source that operates via so-called Dicke superradiance has been created by scientists at the University of Cambridge (Cambridge, England) and the PN Lebedev Physical Institute (Moscow, Russia); the two-section gallium nitride (GaN)-based laser diode produces 1.4 ps optical pulses at a 10 MHz repetition rate and a 408 nm wavelength. Superradiance is an alternative to Q-switching or modelocking for producing ultrafast pulses. Previously achieved only in near-IR laser diodes emitting between 800 and 1580 nm, superradiance requires a very high density of electrons and holes, as well as the presence of a resonant electromagnetic field to help in pairing the electrons and holes.

The researchers started with a commercially available, single-transverse-mode violet laser diode from Sharp Corp. (Osaka, Japan); after uncapping the laser, they used focused-ion-beam etching to modify the p-contact metallization, creating a two-section device with an absorber section and a gain section. The gain section was driven at room temperature with electrical pulses that were several nanoseconds long. At a reverse bias of -3.7 V, superradiance occurred, producing peak optical powers greater than 2.5 W and pulse lengths almost four orders of magnitude shorter than the electrical pulse length. Compared to the emission spectrum of the device operated at a lower reverse bias that produced gain-switched pulses (black), the superradiant pulses (red) showed a red shift of 2.7 nm. Contact Ian White at [email protected].

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

March 31, 2025
Enhance your remote sensing capabilities with Chroma's precision-engineered optical filters, designed for applications such as environmental monitoring, geospatial mapping, and...
March 31, 2025
Designed for compatibility with a wide range of systems, Chroma's UV filters are engineered to feature high transmission, superior out-of-band blocking, steep edge transitions...
March 31, 2025
Discover strategies to balance component performance and system design, reducing development time and costs while maximizing efficiency.
March 31, 2025
Explore the essential role of optical filters in enhancing Raman spectroscopy measurements including the various filter types and their applications in improving signal-to-noise...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!