3D solar cells generate up to 20 times more energy

May 11, 2012
Flat-panel solar photovoltaic (PV) designs benefit tremendously from tracking hardware; however, such hardware increases installation costs and cost per watt—especially for residential installations.

Flat-panel solar photovoltaic (PV) designs benefit tremendously from tracking hardware; however, such hardware increases installation costs and cost per watt—especially for residential installations. An alternative to tracking is a newly designed 3D solar configuration from the Massachusetts Institute of Technology (MIT; Cambridge, MA). While the 3D PV design increases the required flat-panel area, the PV panels themselves are often the lowest-cost component in a solar installation.

Using standard Monte Carlo simulations and genetic algorithms, a series of triangular structures was arranged to optimize energy density by minimizing cell shading and maximizing the re-absorption of light reflected by surrounding cells. The result was a series of structures—an open cube (one- and two-level) with panels both inside and outside as well as a ridged tower structure—that increased energy generation by 2 to more than 20 times that of a flat, untracked panel of the same base area, respectively. The increase is primarily due to the ability to harvest energy over a longer time period during the day, especially when the sun is at lower elevation angles. Due to the enhanced ability to collect diffuse and scattered light, 3D PV structures can also generate more power during cloudy weather compared to flat panels. Other 3D designs such as an open-flower structure are being developed using biomimetic principles to further increase energy generation. Contact Jeffrey C. Grossman at [email protected].

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

Advancing Neuroscience Using High-Precision 3D Printing

March 7, 2025
Learn how Cold Spring Harbor Laboratory Used High-Precision 3D Printing to Advance Neuroscience Research using 3D Printed Optical Drives.

From Prototyping to Production: How High-Precision 3D Printing is Reinventing Electronics Manufacturing

March 7, 2025
Learn how micro 3D printing is enabling miniaturization. As products get smaller the challenge to manufacture small parts increases.

Sputtered Thin-film Coatings

Feb. 27, 2025
Optical thin-film coatings can be deposited by a variety of methods. Learn about 2 traditional methods and a deposition process called sputtering.

What are Notch Filters?

Feb. 27, 2025
Notch filters are ideal for applications that require nearly complete rejection of a laser line while passing as much non-laser light as possible.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!