Liquid-crystal material has large birefringence for terahertz radiation

Oct. 5, 2012
A group at Nanjing University and Tsinghua University in China is using a fluorinated phenyl-tolane-based nematic liquid crystal (LC) mixture between two thin fused silica plates (rubbed for LC orientation) as a birefringent material for radiation in the 0.4 to 1.6 THz range.

Liquid crystals (LCs) are commonly used at visible wavelengths, but it turns out that these materials can be used for optical devices at terahertz frequencies, too. A group at Nanjing University (Nanjing, China) and Tsinghua University (Beijing, China) is using a fluorinated phenyl-tolane-based nematic LC mixture between two thin fused silica plates (rubbed for LC orientation) as a birefringent material for radiation in the 0.4 to 1.6 THz range. The materials have a mean birefringence of 0.306 over that range, reaching a peak at 0.314 at 1.6 THz.

The gap between the two 0.7-mm-thick plates was 0.127 mm, and for testing the assembly was immersed in a nitrogen atmosphere to avoid water vapor absorption. Terahertz time-domain spectroscopy (THz-TDS) was used to characterize the material, with the refractive-index effects of the fused silica itself measured first and then subtracted out from the subsequent data. Both real and imaginary components of the ordinary (no) and extraordinary (ne) refractive indices were measured (the real portion is shown here). The imaginary part of birefringence, which is associated with the absorption coefficient, showed low absorption over the whole testing range. The LC material has potential for fast tunable terahertz optical devices. Contact Xiao Liang at [email protected].

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!