Holographic microscopy, computational imaging see cells in 3D without contrast agents

March 7, 2013
Two École Polytechnique Fédérale de Lausanne (EPFL) scientists have developed a device that can create three-dimensional (3D) images of living cells and track their reaction to various stimuli without the use of contrast dyes or fluorophores.

Two École Polytechnique Fédérale de Lausanne (EPFL; Lausanne, Switzerland) scientists have developed a device that can create three-dimensional (3D) images of living cells and track their reaction to various stimuli without the use of contrast dyes or fluorophores. Yann Cotte and Fatih Toy have combined holographic microscopy and computational image processing to observe living biological tissues at the nanoscale.

Using their setup, 3D images of living cells can be obtained in just a few minutes at an incredibly precise resolution of less than 100 nm. And because they’re able to do this without using contrast dyes or fluorescent agents, the experimental results don’t run the risk of being distorted by the presence of foreign substances. The researchers developed, image by image, the film of a growing neuron and the birth of a synapse, caught over the course of an hour at a rate of one image per minute. As a low-intensity laser scans the sample from various angles, numerous images extracted by holography are captured by a digital camera, assembled by a computer, and “deconvoluted” in order to eliminate noise.

To develop their algorithm, the young scientists designed and built a “calibration” system using a thin layer of aluminum that they pierced with 70-nm-diameter “nanoholes” spaced 70 nm apart. The assembled 3D image of the cell, which looks as focused as a drawing in an encyclopedia, can be virtually sliced to expose internal elements such as the nucleus, genetic material, and organelles. In a company that’s in the process of being created and collaborating with startup Lyncée SA, they hope to develop a system that could deliver these kinds of observations in vivo, without the need for removing tissue, using portable devices. They will continue to design laboratory material based on these principles. Contact Yann Cotte at [email protected].

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

Advancing Neuroscience Using High-Precision 3D Printing

March 7, 2025
Learn how Cold Spring Harbor Laboratory Used High-Precision 3D Printing to Advance Neuroscience Research using 3D Printed Optical Drives.

From Prototyping to Production: How High-Precision 3D Printing is Reinventing Electronics Manufacturing

March 7, 2025
Learn how micro 3D printing is enabling miniaturization. As products get smaller the challenge to manufacture small parts increases.

Sputtered Thin-film Coatings

Feb. 27, 2025
Optical thin-film coatings can be deposited by a variety of methods. Learn about 2 traditional methods and a deposition process called sputtering.

What are Notch Filters?

Feb. 27, 2025
Notch filters are ideal for applications that require nearly complete rejection of a laser line while passing as much non-laser light as possible.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!