Ultrafast detector senses both near-IR and terahertz pulses

Sept. 4, 2013
A photodetector has been created that responds with precise timing to both near-IR and terahertz radiation.

A photodetector has been created that responds with precise timing to both near-IR and terahertz radiation. Developed by researchers at the University of Erlangen-Nuremberg, Technical University Dresden, and Helmholtz-Zentrum Dresden-Rossendorf (all in Germany) and the University of California, Santa Barbara, the detector is designed for simultaneously resolving optical and terahertz pulses for terahertz-pump/optical-probe experiments, as well as characterizing high-peak-power (30 kW) terahertz pulses.

The field-effect-transistor (FET)-based detector has an area of 345 μm2 and is located on the flat of a plano-convex silicon lens; near-IR light accesses the device directly through air, while terahertz radiation is incident from the opposite direction and is sensed after being focused through the lens. (In an alternate configuration, both near-IR and terahertz light are incident from the same direction in free space on a device with an area of 1.17 mm2.) Terahertz radiation from 0.24 to 4.9 THz was detected with a detection time constant of shorter than 30 ps, while the time constant for near-IR light (pulses emitted by a Ti:sapphire laser) was 150 ps. The smallest dimensions of the FET devices were quite large at 3 μm, allowing easy fabrication. The detectors can be used in either pulsed or continuous-wave tabletop experiments. Contact Sascha Preu at [email protected].

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

March 31, 2025
Enhance your remote sensing capabilities with Chroma's precision-engineered optical filters, designed for applications such as environmental monitoring, geospatial mapping, and...
March 31, 2025
Designed for compatibility with a wide range of systems, Chroma's UV filters are engineered to feature high transmission, superior out-of-band blocking, steep edge transitions...
March 31, 2025
Discover strategies to balance component performance and system design, reducing development time and costs while maximizing efficiency.
March 31, 2025
Explore the essential role of optical filters in enhancing Raman spectroscopy measurements including the various filter types and their applications in improving signal-to-noise...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!