• Subscribe
  • Podcasts
  • Videos
  • Webinars
  • White Papers
  • PhotonicsNXT
  • Buyer's Guide
  • Get Published!
    1. Commentary

    Photon sieve: the future of ultralight space telescopes?

    July 27, 2016
    A diffractive space-telescope primary could be made of an unfurlable thin film.
    John Wallace 720 5d264dd48fa1e
    Sending a telescope into space comes at a high price, for more than one reason. Launching the Hubble Space Telescope was costly because it was heavy, due in part to its massive, rigid primary mirror and mirror mount. Building the James Webb Space Telescope, let alone launching it, is costly not only due to its weight, but also the fact that it needs a massive, intricate, and expensive mechanism to allow it to unfold and then keep its various parts aligned in space. 
    (Image: NASA)
    This drawing shows the difference between a Fresnel zone plate (left) and a photon sieve (right). The latter is patterned with millions of precisely machined holes.
    This drawing shows the difference between a Fresnel zone plate (left) and a photon sieve (right). The latter is patterned with millions of precisely machined holes.
    (Image NASA/W. Hrybyk; source http://www.nasa.gov/feature/goddard/2016/nasa-team-begins-testing-of-a-new-fangled-optic)
    Example 2. Etched into a silicon wafer, the photon sieve shown below is a lab test device developed at NASA’s Goddard Space Flight Center (Greenbelt, MD); it is a miniature prototype of a future 1-m-diameter photon sieve that could one day be used in space to image the Sun at UV wavelengths. While this photon sieve brings red laser light to a pinpoint focus on its optical axis, it produces exotic diffraction patterns when viewed from the side, as seen here.
    Example 2. Etched into a silicon wafer, the photon sieve shown below is a lab test device developed at NASA’s Goddard Space Flight Center (Greenbelt, MD); it is a miniature prototype of a future 1-m-diameter photon sieve that could one day be used in space to image the Sun at UV wavelengths. While this photon sieve brings red laser light to a pinpoint focus on its optical axis, it produces exotic diffraction patterns when viewed from the side, as seen here.
    About the Author

    John Wallace | Senior Technical Editor (1998-2022)

    John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

    Email

    Continue Reading

    Sponsored Recommendations

    How to Tune Servo Systems: Force Control

    Oct. 23, 2024
    Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

    Laser Machining: Dynamic Error Reduction via Galvo Compensation

    Oct. 23, 2024
    A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

    Boost Productivity and Process Quality in High-Performance Laser Processing

    Oct. 23, 2024
    Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

    Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

    Oct. 23, 2024
    In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

    Voice your opinion!

    To join the conversation, and become an exclusive member of Laser Focus World, create an account today!