Oxide acquires VUV laser business from Lumeras

Sept. 4, 2018
Oxide adds 114 nm (11 eV) laser technology to its UV and DUV laser lines.

Oxide Corporation (Yamanashi, Japan; Yasunori Furukawa, president) has acquired the vacuum-ultraviolet (VUV) laser business of Lumeras LLC (Santa Cruz, CA). Established in 2008, Lumeras, which describes itself as an "early-stage technology company," produces high-photon-energy (11 eV, or a wavelength of 114 nm) laser sources, which are used in research institutes for cutting-edge materials-science applications, including photoemission electron spectroscopy. The VUV-1 series operates at sub-100-Hz repetition rates, while the VUV-2 series consists of quasi-continuous-wave (quasi-CW) systems that operate at megahertz rep rates.

Oxide Corporation, established in 2000, manufactures deep-ultraviolet (DUV) laser sources (213 - 266 nm), ultraviolet (UV) laser sources (355 nm), fiber lasers, and high-quality nonlinear optical crystals, many for use in the DUV, including LB4: Li2B4O7, LiTaO3: SLT/MgSLT, and LiNbO3: SLN/MgSLN, among others. Additional products include speckle-contrast measurement systems, phosphor evaluation systems, laser wavelength convertors, and others. Oxide continues to expand its UV laser product offerings for the semiconductor manufacturing, material analysis, biotechnology, and medical markets.

With the acquisition of Lumeras' VUV laser business, Oxide notes that is is now the only company in the world having a product portfolio spanning the entire UV-DUV-VUV spectrum.

For more info on Oxide, see: www.opt-oxide.com

Source: Oxide

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Advancing Neuroscience Using High-Precision 3D Printing

March 7, 2025
Learn how Cold Spring Harbor Laboratory Used High-Precision 3D Printing to Advance Neuroscience Research using 3D Printed Optical Drives.

From Prototyping to Production: How High-Precision 3D Printing is Reinventing Electronics Manufacturing

March 7, 2025
Learn how micro 3D printing is enabling miniaturization. As products get smaller the challenge to manufacture small parts increases.

Sputtered Thin-film Coatings

Feb. 27, 2025
Optical thin-film coatings can be deposited by a variety of methods. Learn about 2 traditional methods and a deposition process called sputtering.

What are Notch Filters?

Feb. 27, 2025
Notch filters are ideal for applications that require nearly complete rejection of a laser line while passing as much non-laser light as possible.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!