Fluorescence-producing, self-powered microfluidic chip detects cancer fast

March 18, 2013
Researchers at the RIKEN Advanced Science Institute have developed a self-powered microfluidic chip that can perform an analysis for cancer-specific microRNAs in a drop of patient blood in as little as 20 minutes.

Researchers at the RIKEN Advanced Science Institute (Wako, Japan) have developed a self-powered microfluidic chip that can perform an analysis for cancer-specific microRNAs in a drop of patient blood in as little as 20 minutes. Claimed as the most sensitive microRNA detector yet, if enough of the target is present, the chip produces a fluorescence signal that can be detected using a fluorescence microscope.

Early detection is vital for the effective treatment of cancer. In many cases, tell-tale biomarkers are present in the bloodstream long before outward symptoms become apparent. Early-stage cancers, for example, release tiny quantities of biomolecules called microRNAs into the blood. The development of an inexpensive and rapid point-of-care diagnostic test capable of spotting such early biomarkers of disease could therefore save many lives.

The test developed by Kazuo Hosokawa and colleagues at Riken is inexpensive to make and relies on an internal pressure gradient to pump the sample through the microchannels, thus eliminating the need for an external power supply—features that make the system highly suitable for practical point-of-care disease diagnosis. Previous versions of the chip, however, could only detect microRNA at concentrations far above those required for early cancer detection.

A self-powered microfluidic chip for cancer biomarker detection. The sample and two fluorescence amplification reagents are added to the three inlet ports. The presence of cancer biomarkers can be detected by fluorescence in the main microfluidic channel.

In their latest work, Hosokawa and co-workers increased the chip's sensitivity by boosting the intensity of fluorescence generated by a positive test. The original chip worked by immobilizing target microRNA on probe DNA in the main microchannel, where each bound site produced a fluorescent signal. In the new chips, the researchers added a fluorescence amplification process that involves passing two amplification reagents over the immobilized microRNA. The reagents—a fluorescent tag and a branched linker—bind to immobilized microRNA to form tree-like dendritic structures that amplify the fluorescence signal by up to 1,000 times. Using this amplification process, the researchers were able to improve the sensitivity of the device to a level approaching that required for early cancer detection.

The next step for the team will be to further simplify the device by eliminating the need for a fluorescence microscope, which will involve replacing the fluorescent tags with some other form of marker. "That is a very important direction for future development," says Hosokawa. "We are planning the use of different labelling materials instead of the fluorescent dye, such as gold particles, which would enable naked-eye detection."

Their work appears in the journal PLoS One; for more information, please visit http://www.plosone.org/article/info%3Adoi%2F10.1371%2Fjournal.pone.0048329.

-----

Follow us on Twitter, 'like' us on Facebook, and join our group on LinkedIn

Subscribe now to BioOptics World magazine; it's free!

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!