Optics- and photonics-enabled endomicroscopic probes visualize live-cell activity

Feb. 13, 2018
The probes could one day reduce dependence on invasive biopsies for diagnosing cancer and other diseases.

A team of researchers at the Johns Hopkins School of Medicine (Baltimore, MD) has developed two endoscopic probes that significantly sharpen the technology's imaging resolution and permit direct observation of fine tissue structures and cell activity in small organs in sheep, rats, and mice. If clinical trials in humans are successful, the researchers say, the probes could one day reduce dependence on invasive biopsies for diagnosing cancer and other diseases.

Related: Minimally invasive endoscope, enabled by photonics, finds colon tumors quickly

"These tools are able to look into organs, such as the bile duct, pancreas and lungs, giving us a faster and safer way to diagnose a variety of diseases," says Xingde Li, Ph.D., professor of biomedical engineering at the Johns Hopkins University School of Medicine.

In a paper published in Light: Science & Applications, the researchers described the development of an advanced miniature two-photon endomicroscope that uses cells' native ability to fluoresce without the use of injected dyes to gather cellular structural images and functional information on the metabolic status of the organs they populate.

To miniaturize this microscopy technology, Li and his team needed to condense the capabilities of a benchtop two-photon microscope into a probe only about 2 mm in diameter. They used a short-pulsed laser to create bursts of photons and transmit them down a flexible, specially designed fiber-optic cable connected to the probe. The photons then travel through a miniature lens, which also functions to refocus the fluorescence light from the cells and send it back to detectors through the same fiber-optic cable. The researchers also designed the probe to capture 3D images by incorporating a very small scanner, which changes which areas of the organ the light is emitted to. This allows researchers to gather more information about the tissue around the probe.

A major challenge in developing this technology, Li says, was re-collecting the fluorescence light from the cells into the same tool. The lens had to be carefully crafted to focus the long-wavelength light emitted from the laser while also collecting the short-wavelength fluorescence light emitted from the cells. The fiber-optic cord also had to be custom-created for this technology to transmit both the excitation and fluorescence light while minimizing the background noise generated in the fiber-optic cable. Commercial fibers contained germanium-doped cores, which after years of troubleshooting were found to be the primary source of interfering signals within the fiber-optic cable.

Because the probe can capture images of live tissues within the body, the researchers were able to monitor changes in the metabolic activity of cells, which could be indicative of cancer, stroke, or heart disease, without using a chemical label—a major advancement from similar techniques that lacked the sensitivity to capture such subtle, but distinct, dynamic changes.

The probe was also able to monitor structural changes in various types of tissues, which could be useful in diagnosing conditions where biopsies are not an option. One such application is in the prediction of preterm births. In mice, the researchers were able to assess the mechanical strength of the cervix by monitoring changes in the collagen structures within the tissue and predict which mice would give birth prematurely.

This image taken by the two-photon endomicroscope shows the metabolic activity of mouse kidney cells. (Image credit: Xingde Li)

In a second article published in Nature Communications, the team described a novel ultrathin optical coherence tomography (OCT) probe that has allowed researchers to gain 3-4X higher resolution when compared to similar technologies in clinical use. "To achieve this, we had to use a light source with a broader spectrum of color, and the challenge was to focus all those colors onto a single spot without making the image look fuzzy," Li says. "Cameras do this by using a large lens, but we did not have that luxury." The improvements also included reducing the probe by about half the size of those currently in use to about 500 µm in diameter, about the same width of a salt crystal.

To achieve this, Li and his team simplified the design by precisely forming the end of the fiber-optic cord into a tiny ball lens made out of silica, which was able to work as well as its larger counterpart. The ball lens is then precisely ground and coated with gold to reflect and focus the light onto the tissue.

In addition, Li and his team found the small probe had an improved flexibility that allowed them to access and image small lumens in complex organs in animals—such as the small airways deep in a sheep's lungs—with much clearer visualization on tissue structures than a standard OCT instrument.

Li hopes that if clinical trials approve the instrument for use in humans, the new probe will reduce dependence on biopsies to diagnose heart disease and cancer. This is especially important, he says, for probing organs such as the pancreas, which is not only hard to access with current endoscopic probes, but is also dangerous to biopsy.

The new probe also promises to be less expensive than currently used probes, which run from $800 to $1000 dollars per probe. Li's probe has a materials cost of $20–$50. This significant reduction in cost is important for technologies intended for one-time use in humans.

Li and his team hope to begin clinical trials for their OCT and two-photon probes to establish their safety and efficacy in humans.

About the Author

BioOptics World Editors

We edited the content of this article, which was contributed by outside sources, to fit our style and substance requirements. (Editor’s Note: BioOptics World has folded as a brand and is now part of Laser Focus World, effective in 2022.)

Sponsored Recommendations

Precision Motion Control for Photonics: 5 Keys to Success

Aug. 30, 2024
Precision motion control is a key element in the development and production of silicon-photonic devices. Yet, when nanometers matter, it can be challenging to evaluate and implement...

Precision Motion Control for Sample Manipulation in Ultra-High Resolution Tomography

Aug. 30, 2024
Learn the critical items that designers and engineers must consider when attempting to achieve reliable ultra-high resolution tomography results here!

Motion Control Technologies for Medical Device Joining Applications

Aug. 30, 2024
Automated laser welding is beneficial in medical device manufacturing due to its precision, cleanliness, and efficiency. When properly optimized, it allows OEMs to achieve extremely...

How to Maximize Machine Building Performance with High-Performance Laser Processing

Aug. 30, 2024
Learn how an automotive high-speed laser blanking machine manufacturer builds machines that maximize throughput for faster processing speeds and improved productivity.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!