SPECTROSCOPY/BREAST CANCER: Light-emitting cables enable MRI/NIR approach to breast cancer assessment

March 18, 2014
A new approach that combines magnetic resonance imaging (MRI) with near-infrared (NIR) spectroscopy could spare women with suspicious mammogram results from invasive biopsies to look for tumors.

A new approach that combines magnetic resonance imaging (MRI) with near-infrared (NIR) spectroscopy could spare women with suspicious mammogram results from invasive biopsies to look for tumors. The noninvasive method promises specific benefit to women with dense breasts (which are harder for radiologists to analyze with traditional imaging equipment) who are more likely to develop and die from breast cancer.

Prior approaches for MRI/NIR spectroscopy used parallel plates and relied on custom molds for each patient. Biomedical engineers from the Thayer School of Engineering at Dartmouth College (Lebanon, NH), working with radiologists, developed a more flexible, convenient, and comfortable approach. They designed a set of eight light-transmitting cables that can be adjusted to surround the breast with light tension. For the patient, who lies on her stomach, the procedure is nearly identical to clinical MRI.

Eight women participated in a trial of the new design.1 "This work is a huge improvement on previous designs of MRI/NIRS systems," said Michael Mastanduno, corresponding author of a paper describing the study. "The new interface allowed us to target lesions more effectively than ever before." He added that setup time was faster and images were of higher quality. The approach also offers increased coverage of the chest, giving providers improved visibility for tissue typically difficult to see, such as the area near the armpit.

As a next step, the researchers will test MRI/NIR spectroscopy in women with suspicious lesions.

1. M. Mastanduno et al., Acad. Radiol., 21, 2, 141–150 (2014); doi:10.1016/j.acra.2013.09.025.

About the Author

Barbara Gefvert | Editor-in-Chief, BioOptics World (2008-2020)

Barbara G. Gefvert has been a science and technology editor and writer since 1987, and served as editor in chief on multiple publications, including Sensors magazine for nearly a decade.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!