Japanese researchers use SERRS to determine blood sugar levels

May 24, 2010
Takamatsu, Japan-- Surface-enhanced resonance Raman spectroscopy (SERRS) has proved to be an astute determiner of how much HbA1c is held in blood samples, which could lead to better diagnosis and treatment  of people with diabetes.


Takamatsu, Japan-- Surface-enhanced resonance Raman spectroscopy (SERRS) has proved to be an astute determiner of how much HbA1c is held in blood samples, which could lead to better diagnosis and treatment of people with diabetes.

When sugars attach themselves to the main blood protein, hemoglobin, they remain for the life of the cell that contains the molecules. Chemical analysis of these glycated proteins, called HbA1c, provides an indication of how well one’s body processes sugar intake. Normal blood contains 6% or less of HbA1c—9% or more points to someone with poor sugar metabolism. Tests of HbA1c are performed routinely on people with diabetes to see how well diet, exercise or insulin intake helps with the disease.

As with many chemical tests, however, the sensitivity can be less than ideal, and there is much ongoing research to improve HbA1c test results. Now, scientists at the National Institute of Advanced Industrial Science and Technology (AIST) in Japan have found that SERRS may provide a highly sensitive way to determine blood glucose levels.

SERRS is used to study other biomolecules of interest and is better than standard Raman scattering experiments at culling the spectra from weak signals emitted by molecules such as DNA, cytochrome and, of course, hemoglobin. However, although hemoglobin has been studied using SERRS techniques, differentiating it from HbA1c had not been attempted successfully until now.

The AIST researchers, led by Mitsuru Ishikawa of the institute’s Health Technology Research Center, incubated hemoglobin A (HbA) and HbA1c with 60-nm silver particles, which provided signal enhancement. They deposited the colloidal solutions via spin-coating onto slides and then mounted the slides onto an inverted microscope. They then illuminated the samples with a 532-nm continuous-wave diode laser. Using a CCD camera, a CCD sensor, and a holographic notch filter to block Rayleigh scattering, the researchers captured Raman scattering and SERRS imaging data.

The group found that HbA1c exhibits a SERRS band at about 770 to 830 cm-1 (predominantly at 827 cm-1), whereas the HbA showed bands at 1403 and 1652 cm-1. The investigators reason that the band at 827 cm-1 appears because of the presence of a glucose moiety on the hemoglobin molecule – not from free glucose nearby—thus making the band a major determinant of HbA1c.

In addition, they saw that both HbA and HbA1c induced aggregation of the silver nanoparticles in solution, with HbA causing larger formations. Again, they found that the presence of the glucose moiety on the HbA1c was the cause of the different aggregation patterns.

Sponsored Recommendations

Advancing Neuroscience Using High-Precision 3D Printing

March 7, 2025
Learn how Cold Spring Harbor Laboratory Used High-Precision 3D Printing to Advance Neuroscience Research using 3D Printed Optical Drives.

From Prototyping to Production: How High-Precision 3D Printing is Reinventing Electronics Manufacturing

March 7, 2025
Learn how micro 3D printing is enabling miniaturization. As products get smaller the challenge to manufacture small parts increases.

Sputtered Thin-film Coatings

Feb. 27, 2025
Optical thin-film coatings can be deposited by a variety of methods. Learn about 2 traditional methods and a deposition process called sputtering.

What are Notch Filters?

Feb. 27, 2025
Notch filters are ideal for applications that require nearly complete rejection of a laser line while passing as much non-laser light as possible.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!