Fiber-optic 'photonic neurons' to be developed in collaboration between Princeton University and Lockheed Martin

July 20, 2011
Researchers at Princeton University and Lockheed Martin are collaborating on a "photonic neuron" project, with the aim of creating an optical-fiber-based computational device that works similarly to neurons except that it will be faster by a factor of a billion.

Princeton, NJ and Cherry Hill, NJ--Researchers at Princeton University and Lockheed Martin are collaborating on a "photonic neuron" project, with the aim of creating an optical-fiber-based computational device that works similarly to neurons except that it will be faster by a factor of a billion. The properties of neuronssuch as thresholdingare nonlinear, which will have to be imitated optically, for example by using nonlinear fiber.

Practical uses of a neuron-type photonic circuit include those that require quick decisions to be made from incomplete data, such as locating a terrorist from a radio signal or deciding whether to eject a fighter pilot from a jet. Other uses might include guiding robotic automobiles based on video input, or quickly gathering useful information from large amounts of genetic data.

The research is led by Paul Prucnal, a Princeton professor of electrical engineering, and David Rosenbluth, a neuroscientist and principle engineer at Lockheed Martin's Advance Technology Laboratory). It is funded by Lockheed Martin and Princeton's Stuart M. Essig and Erin S. Enright Fund for Innovation in Engineering and Neuroscience.

Initiated in 2008, the project seeks to overcome the inherent speed constraints of electrical circuits, which are ultimately limited by the time it takes electricity to flow through wires. Instead, the processing will be all-optical.

In addition, the hardware will rely on computational concepts used by neural circuits. In living neural networks, each neuron, whether in the brain or peripheral circuits of the nervous system, is connected to other neurons, which communicate through electrochemical pulses known as action potentials, or, colloquially, as "spikes." Based on the pattern of incoming spikes, a neuron decides whether to send out its own signal to convey information to the rest of the network. This function is the basis for neural computing.

Digital-analog hybrid

"We are transposing learning, inhibition, and other behaviors typical of neural processing onto fiber-optic circuits," Rosenbluth said. "But I don't think of it as trying to reproduce something in the brain. It's a hybrid between the analog computing done in the brain and the purely digital systems used by most computers."

When Prucnal and Rosenbluth first began talking about the possibility of studying blending fiber-optic signal processing and neuroscience, they noticed that although the mathematical equations used to model neural and fiber-optic networks used different variables, they were very similar in their overall formulation.

"We put the equations side-by-side and it was really an 'aha!' moment for us," Prucnal said. "It was pretty exciting that it might actually work."

(Source: http://www.princeton.edu/main/news/archive/S31/07/36I49/index.xml?section=featured)

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!