Frame Grabber for Security Applications Provides 16 Analog Camera Inputs for Low-Cost Color Cameras

Feb. 12, 2009
Las Vegas, NV - The PC_EYE/JPG from American ELTEC is a 16-Channel PCI Express Frame Grabber for security applications using low-cost color cameras. It offers on-board JPEG compression hardware for 16 channels, along with an on-board scaling device and a fast PCI Express Bus interface with a bandwidth of 250 MByte/s.
Las Vegas, NV - The PC_EYE/JPG from American ELTEC is a 16-Channel PCI Express Frame Grabber for security applications using low-cost color cameras. It offers on-board JPEG compression hardware for 16 channels, along with anon-board scaling device and a fast PCI Express Bus interface with a bandwidth of 250 MByte/s. It records analog color camera data via 16 parallel inputs, all of which contain a separate fast AD converter. Thanks to this technology, images can be recorded in real time and stored in the PC’s main memory.The PC_EYE/JPG is intended for security applications where video images from up to 16 color cameras are fed into a PC's main memory for storage or into the graphics board for display. Data is acquired in compressed or in raw format. An on-board scaling unit can transform full-resolution images to CIF size or smaller for efficient display in split screen applications.There are 16 analog-to-digital converters (ADCs) that up to 16 cameras can be connected to. Each camera has its own ADC (SAA 7113-type) as well as its own color separator. This makes it possible to switch cameras in the digital domain, minimizing multiplex times. Since the analog input is not switched, there is no PLL settling delay, which can take up to several frame times in other multiplexing schemes.All standard color and monochrome video cameras are supported in hardware and software. The video standards PAL, NTSC, and SECAM can be used.Pricing for the PC_EYE/JPG frame grabber is under $1,800 in single piece quantities. Contact American ELTEC for details.For additional information, contact American ELTEC, Inc., Quail Park IV, Suite 57, 2810 W. Charleston Ave., Las Vegas, NV 89102. Tel: 702-878-4085; Fax: 702-878-4735. E-mail: [email protected]; Web: www.americaneltec.com.Reader Service Inquiries: Please send to Janet Ferris at American ELTEC Inc., Quail Park IV, Suite 57, 2810 W. Charleston Ave., Las Vegas, NV 89102. Tel: 702-878-4085; Fax: 702-878-4735. E-mail: [email protected]. Editor’s Note: American ELTEC is a division of ELTEC Elektronik AG, headquartered in Mainz, Germany. ELTEC has been an innovator in the design and manufacture of high-performance embedded computer boards, system-level and imaging products for industrial applications since 1978.

Sponsored Recommendations

What are Notch Filters?

Feb. 27, 2025
Notch filters are ideal for applications that require nearly complete rejection of a laser line while passing as much non-laser light as possible.

Using Optical Filters to Optimize Illumination in Fluorescence and Raman Systems

Feb. 27, 2025
Discover how Semrock products can help you get the most out of your fluorescence and Raman excitation designs, regardless of light source.

Melles Griot Optical Systems and Semrock Optical Filters for Spatial Biology

Feb. 26, 2025
Discover why a robust, high-throughput fluorescence imaging system with Semrock optical filters is key for Spatial Biology.

Understanding Practical Uses and Optimization Techniques for Fluorescence Optical Filters

Feb. 26, 2025
Learn about optical fluorescence and which optical filters to include in your instrument set up. See more with Semrock filter sets.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!