Hannover. Germany - Environmentally safe methods are increasingly being used to rid fields used for agricultural and horticultural of unwanted plants, or weeds. Chemical pesticides can be used selectively and are suitable for use where conventional, thermal methods such as flaming are either not exact enough, or are too energy consuming. However, drift and overdosing often lead to harmful herbicide residues in the top soil layers, or in surface water.
By using an exact, selective laser beam, the growth of weeds can be impaired by destroying the sensitive growth centers of the plants, their so-called meristems. Current laboratory results show that a minimum dose of around 35 Joules is necessary to kill seedlings, and this laser energy can be exactly and effectively adapted to the plant species and growth stage. This is the result of a current research project between the Laser Zentrum Hannover (LZH) and the Biosystems and Horticultural Engineering (BGT) faculty of the Leibniz Universität Hannover.
Researchers from the LZH Department of Materials and Processes, Safety Technology Group are using a CO2 laser in the infrared range with a wavelength of 10.6 µm in their current investigations. The laser radiation has a direct thermal effect on the plants. By using a galvanometer scanner with a flexible mirror system, the laser beam can be moved quickly from plant to plant, and can be focused with high precision on the near-surface meristems. Under laboratory conditions, an accuracy of <± 1 mm could be achieved, and under greenhouse conditions, a laser on a rail carriage achieved accuracies of ± 3.4 mm.
A stereo camera system is used to recognize the plants and optimize the position of the laser beam. After using a complex processing method, scientists of the BGT have compared camera images based on threshold level filtering and edge detection, with Active Shape Models of the plants. The position of the leaves can be used to determine exactly where the meristem position is, and once these coordinates are found, a signal is sent to the laser to “hit the target”.
Scientists at the Laser Zentrum Hannover (http://www.lzh.de) have been able to determine exactly how much energy is needed to achieve an optimal effect on the target, making this method especially efficient. At the moment, different irradiation times in different weed concentrations are being tested concerning economic viability. Current knowledge shows that the best results for large areas can be provided by using autonomous field robots working in a stop-and-go mode.
The project “Investigations on the Effect of the Laser Beam on young Plants for Weed Control using Image Processing” is subsidized by the German Research Foundation (DFG). For more information contact [email protected].