Light-activated LC elastomer propels biomimetic “snail robot”
Researchers at the Faculty of Physics at the University of Warsaw, Poland used liquid crystal elastomer technology to demonstrate a bio-inspired (or biomimetic) microrobot capable of mimicking the adhesive locomotion of snails and slugs in natural scale. The 10-millimeter long (centimeter-long) soft robot harvests energy from a laser beam and can crawl on horizontal surfaces, climb vertical walls and an upside-down glass ceiling. The research is published in Macromolecular Rapid Communications.
Crawling by traveling deformation of a soft body is a widespread mode of locomotion—from microscopic nematodes to earthworms to gastropods—animals across scales use it to move around different, often challenging environments. Snails use mucus to control the interaction between their ventral foot and the surface. Their adhesive locomotion has some unique properties: it can be used on different surfaces, including wood, metal, glass, teflon (PTFE), or sand in various configuration, including crawling upside-down. For robotics, low complexity of a single continuous foot could offer resistance to adverse external conditions and wear and tear, while the constant contact with the ground may provide high margins of failure resistance. Adhesive locomotion in robots have been limited so far to externally powered, centimeter-scale demonstrators with electro-mechanical drives.
Researcher from the University of Warsaw with colleagues from the Department of Mathematical Sciences at Xi’an Jiaotong-Liverpool University in Suzhou, China have now developed a natural-scale soft snail robot based on the opto-mechanical response of a liquid crystalline elastomer (LCE) continuous actuator. The robot propulsion is driven by light-induced traveling deformations of the soft body and their interaction with the artificial mucus layer (glycerin). The robot can crawl at the speed of a few millimeters per minute, about 50 times slower than snails of comparable size, also up a vertical wall, on a glass ceiling and across obstacles (see video here).
“Despite the slow speed, need of constant lubrication and low energy efficiency, our elastomer soft robot offers unique insights into micromechanics with smart materials and may also provide a convenient platform for studying adhesive locomotion,” says Piotr Wasylczyk, head of the Photonic Nanostructure Facility at the Faculty of Physics of the University of Warsaw, Poland, who led the study.
Researchers, who have already demonstrated a natural-scale light-power caterpillar robot, believe that new generation of smart materials, together with novel fabrication techniques will soon allow them to explore more areas of small-scale soft robotics and micro-mechanics.
The research on soft micro-robots and polymer actuators are funded by the National Science Center (Poland) within the project "Micro-scale actuators based on photo-responsive polymers" and by the Polish Ministry of Science and Higher Education with "Diamentowy Grant" awarded to M. Rogóż.
SOURCE: University of Warsaw; https://www.fuw.edu.pl/press-release/news5987.html
Gail Overton | Senior Editor (2004-2020)
Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.