High-power petawatt laser set to begin operation at University of Michigan

Aug. 16, 2021
The 3 petawatt ZEUS laser will primarily be used to study extreme plasmas, a state of matter in which electrons break free of their atoms, forming what amounts to charged gases.

The 3 petawatt (3 PW) ZEUS laser at the University of Michigan (U-M; Ann Arbor, MI) has been awarded $18.5 million by the National Science Foundation (NSF; Alexandria, VA) to establish it as a federally funded international user facility. ZEUS is expected to begin its first experiments in early 2022.

The U.S. built the worlds first petawatt laser in 1996, but hasnt kept pace with more ambitious systems under construction elsewhere in the world. This includes two 10 PW lasers in Europe and a 5.3 PW laser in China, which also has plans to build a 100 PW laser. While the new laser doesnt pack as much raw power, its approach will simulate a laser that is roughly a million times more powerful than its 3 PW.

The ZEUS laser will primarily be used to study extreme plasmas, a state of matter in which electrons break free of their atoms, forming what amounts to charged gases.

Experiments at the facility are expected to contribute to the understanding of how the universe operates at the subatomic level, how astrophysical phenomena such as jets can be produced by black holes, how materials change on extremely fast timescales, and to the development of smaller and more efficient particle accelerators for medical imaging and treatment.

Extreme plasma made with tabletop laser technology offers a lower-cost alternative for fundamental research in physics compared to large-scale particle accelerators, which cost billions to build, says Franko Bayer, project manager of the construction of ZEUS. 

At first, one of the three target areas will launch experiments at half a petawatt, a sixth of its peak power. The laser will send either one or five ultrashort laser pulses per second, with each pulse lasting between 20 and 25 quadrillionths of a second, into targets made of gas—turning gas atoms into plasma. The system will gradually ramp up to full power over two years, scheduled to begin its signature experiments and user operations in October 2023.

That setup will eventually send the full-power laser beam into a vacuum chamber where the laser beam will be focused on a gas target with a colliding electron beam traveling in the opposite direction, simulating a much higher-power zetawatt laser. While a petawatt is a quadrillion watts, or a 1 followed by 15 zeros, a zetawatt is 1 quintillion watts, or a 1 followed by 21 zeros. This gives ZEUS its name, the Zetawatt Equivalent Ultrashort pulse laser System. At full power, pulses will come every minute.

In step with operations, the funding from the NSF will ramp up gradually as the ZEUS facility reaches full capacity, providing $1 million for the year starting in October 2021 and $5.5 million for the year starting October 2025, the last year of the award. ZEUS is expected to operate as the most powerful laser in the U.S. and as an open user facility, for at least a decade.

ZEUS will primarily be an international user facility, enabling experimental teams from around the world to travel to U-M to run experiments. Proposals will be evaluated by an external panel of scientists and engineers. Because of the funding from the NSF, there will be no cost to users whose experiment proposals are selected to conduct research.

Source: U-M press release

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!