Novel thulium-doped crystal shows potential for ultrashort-pulse operation

March 10, 2017
Researchers have developed and experimented with a novel laser gain material, saying that it has potential for broadband tunable lasing.

A large group of Asian and European researchers has developed and experimented with a novel laser gain material, saying that it has potential for broadband tunable lasing. The new laser crystal, trigonal calcium vanadate, or Tm3+:Ca9La(VO4)7, has a laser emission in the 2 μm spectral region. The researchers hail from Chinese Academy of Sciences (Fuzhou, China), the Graduate School of Fujian Normal University (Fuzhou, China), ITMO University (St. Petersburg, Russia), Universitat Rovira i Virgili (URV; Tarragona, Spain), Max Born Institute for Nonlinear Optics and Short Pulse Spectroscopy (Berlin, Germany), Belarusian National Technical University (Minsk, Belarus), and State Key Laboratory of Structural Chemistry (Fuzhou, China).

The group grew the crystals using the Czochralski method (a standard method for growing crystals that results in an end product called a boule—a large, rough cylindrical shape from which crystals can be cut), modeled them within the Judd-Ofelt (J-O) theory, and then measured their absorption, emission, and Raman spectra, luminescence decay, and transition cross-sections. The thulium dopant ions are interspersed in a disordered way throughout the crystal, resulting in structureless absorption and emission bands while still preserving polarization anisotropy. The gain spectra in both polarizations show that broadband tunable laser emission between 1.8 and 2.05 μm can be achieved, and thus ultrashort-pulse operation. Energy is stored in the upper laser level for a relatively long 1.2 ms time, which allows passive Q-switching. Improving fabrication via annealing and purification of the raw materials should boost the luminescence quantum yield. Reference: Z. Zhang et al., Opt. Mater. Express, 484 (Feb. 2017); http://dx.doi.org/10.1364/ome.7.000484.

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!