Nontoxic QD red phosphor leads to high-quality warm-white LEDs

Feb. 28, 2014
Researchers at LumiSands and the University of Washington have developed a QD-based red phosphor that combines the qualities of good color rendering, low cost, and low toxicity.

Many are the researchers trying to come up with the perfect red-emitting phosphor to add to the conventional blue-emitter/yellow-phosphor white LED to create a more balanced and pleasing white color, or as an essential element in another up-and-coming LED configuration: a UV emitter combined with blue, red, and green phosphors. Approaches to red phosphors include praseodymium-doped and other substances, as well as various sorts of quantum dots (QDs); in addition, some researchers go to great pains to try to make the red-phosphor and yellow-phosphor spectra mutually exclusive, while others are not concerned with that.

Researchers at LumiSands and the University of Washington (both of Seattle, WA) have developed a QD-based red phosphor that combines the qualities of good color rendering, low cost, and low toxicity. Unlike conventional QDs made of cadmium selenide or cadmium sulfide, the Washington researchers’ QDs in their phosphor are silicon (Si)-based. To create the QDs, a silicon wafer was etched to make it porous and the resulting material scraped off, etched, passivated, and mixed with diphenylsilanediol in ethanol. The result is 1- to 5-μm-diameter particles with 5-nm-diameter QDs on their surfaces. The phosphor has a photoluminescence quantum yield (PLQY) of 51% and 41% using 365 nm and 405 nm excitation, respectively. Used in warm-white LEDs, the phosphor enables a color-rendering index of around 95, showing very high-quality white light. Contact Chang-Ching Tu at [email protected].

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!