Quantum-dot LEDs exhibit mid-IR emission at room temperature

Oct. 1, 2008
While quantum-dot (QD)-based light-emitting diodes (LEDs) have made much progress recently, few reports exist of success at mid-infrared (mid-IR) wavelengths, despite their promise for improved efficiency and narrower spectral linewidth compared to quantum-well devices.

While quantum-dot (QD)-based light-emitting diodes (LEDs) have made much progress recently, few reports exist of success at mid-infrared (mid-IR) wavelengths, despite their promise for improved efficiency and narrower spectral linewidth compared to quantum-well devices. Physicists at Lancaster University (Lancaster, England) and at the Ioffe Physico-Technical Institute (St. Petersburg, Russia) have reported intense photoluminescence at a peak of 3.8 µm from indium antimonide/indium arsenide (InSb/InAs) quantum-dot LEDs. The structures were grown by molecular-beam epitaxy using Sb2 and As2 fluxes, which overcome problems with growth interruptions to Sb4 flux during growth. The growth temperature was varied between 300°C and 450°C to determine the InSb QD layer thickness.

The most efficient LED, with an internal nonoptimized quantum efficiency of 0.4%, was composed of larger dots formed at 430°C, with a monolayer of InSb. An undoped 30-nm-thick electron-blocking alloy of aluminum, gallium, arsenide, and antimonide further increased the room-temperature electroluminescence intensity by a factor of five. The LED had an output power of 6 µW, which the team says could be significantly improved with optimization. Contact Anthony Krier at [email protected].

Sponsored Recommendations

Advancing Neuroscience Using High-Precision 3D Printing

March 7, 2025
Learn how Cold Spring Harbor Laboratory Used High-Precision 3D Printing to Advance Neuroscience Research using 3D Printed Optical Drives.

From Prototyping to Production: How High-Precision 3D Printing is Reinventing Electronics Manufacturing

March 7, 2025
Learn how micro 3D printing is enabling miniaturization. As products get smaller the challenge to manufacture small parts increases.

Sputtered Thin-film Coatings

Feb. 27, 2025
Optical thin-film coatings can be deposited by a variety of methods. Learn about 2 traditional methods and a deposition process called sputtering.

What are Notch Filters?

Feb. 27, 2025
Notch filters are ideal for applications that require nearly complete rejection of a laser line while passing as much non-laser light as possible.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!