LGS Innovations to develop lightweight, low-power intersatellite communication platform

May 13, 2016
Secure line-of-sight communication terminals will use less than 3 W of power.

LGS Innovations (Herndon, VA) has been awarded a contract to develop a prototype pair of lightweight, low-power optical communication terminals that will allow for light-based communication between microsatellites in low-earth orbit.

Under the terms of the contract, LGS will be responsible for developing a pair of laser-communication terminals to be launched on two Defense Advanced Research Projects Agency (DARPA) small satellites. The terminals are to be extremely lightweight, weighing less than two pounds each, and will operate on less than 3 W of power.

“Small satellites represent the next generation of global communication technologies,” said Kevin Kelly, CEO of LGS Innovations. “A constellation of small satellites that can communicate with each other will improve our armed forces’ ability to send and receive data from around the planet quickly, safely, securely, and at the lowest cost to date.”

This is the second DARPA contract announced by LGS in recent weeks and is in support of the Inter-Satellite Communication Link project, which seeks to enable direct communication within constellations of small satellites (weighing less than 100 pounds each). Once completed and deployed, the terminals will allow for jam-resistant, high-data-rate, low-latency communication within a network of hundreds of small satellites.

“This program will demonstrate the feasibility of high-bandwidth laser communication between small satellites,” says Linda Braun, vice president of LGS Innovations Photonics Applications & Development. “This is increasingly viewed as an essential part of the DoD’s communication network, because of their lower cost and higher survivability.”

For more info, see http://www.lgsinnovations.com/research-and-technology/.

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Demonstrating Flexible, Powerful 5-axis Laser Micromachining

Sept. 18, 2024
Five-axis scan heads offer fast and flexible solutions for generating precise holes, contoured slots and other geometries with fully defined cross sections. With a suitable system...

Enhance Your Experiments with Chroma's Spectra Viewer

Sept. 5, 2024
Visualize and compare fluorescence spectra with our interactive Spectra Viewer tool. Easily compare and optimize filters and fluorochromes for your experiments with this intuitive...

Optical Filter Orientation Guide

Sept. 5, 2024
Ensure optimal performance of your optical filters with our Orientation Guide. Learn the correct placement and handling techniques to maximize light transmission and filter efficiency...

Ensure Optimal Performance with Shortpass Filters

Sept. 5, 2024
Achieve precise wavelength blocking with our Shortpass Filters. Ideal for applications requiring effective light transmission and cutoff, these filters ensure optimal performance...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!