Power-scalable semiconductor laser is focus of UTA research grant

June 9, 2017
A University of Texas at Arlington engineer is working to develop a semiconductor laser that addresses compactness issues.

Conventional high-power lasers are bulky and require equipment that makes them difficult to use in portable platforms, but a University of Texas at Arlington engineer is working to develop a semiconductor laser that addresses these issues. Weidong Zhou, a professor in the Electrical Engineering Department, is the primary investigator in a 5-year, $3 million Multidisciplinary Research Initiatives grant from the High Energy Laser Joint Technology Office to develop a high-power semiconductor laser that is compact, efficient, and power-scalable.

RELATED ARTICLE: Terahertz spectroscopy and imaging of 3D semiconductors breaks the nanometer barrier

Zhou is collaborating with Ganesh Balakrishnan of the University of New Mexico, Shanhui Fan of Stanford University, and the Air Force Research Laboratory.

Semiconductor lasers use a cavity to create feedback that bounces light back and forth, eventually sending the light from the face of the laser. The laser has become an important tool in forging the next generation of innovative technologies, with anticipated revenue of more than $10 billion in 2016.

However, challenges remain in scaling laser power toward kilo- and megawatt levels, while maintaining excellent beam quality, high-energy efficiency, and compact size. Zhou and the team will rely on nanotechnology principles and structures toward power-scalable, high-power lasers.

"We have been looking at various aspects of lasers in areas where higher-power infrared lasers would be highly desirable--the military, manufacturing and security, for example--and how to address the major challenges associated with those applications," Zhou said. "If we are successful in creating a semiconductor laser based on nanotechnologies, we can greatly reduce the size of these lasers while increasing their power and efficiency."

The laser could eventually be built on a semiconductor wafer. Control electronics and packaging necessary to operate the laser could increase its size to that of a computer, considerably smaller than current laser operation packages.

Some promising applications for these lasers would be precision laser-cutting and 3D machining that could be performed on a tabletop machine instead of a machine that takes up much of a room and lidar sensing for autonomous vehicles. Smaller platforms also would be much more cost-effective.

Zhou is a Fellow of the International Society for Optical Engineering. He has more than 300 journal publications and conference presentations. He joined UTA in 2004 after a brief career in industry. He has been the primary investigator on research grants totaling nearly $8 million and has been involved with more than 40 projects totaling more than $20 million since 2004.

The Electrical Engineering Department is an integral component of UTA's College of Engineering, which is the third-largest in Texas with an enrollment of more than 7200.

Peter Crouch, dean of the College of Engineering, commended Zhou’s innovations as a model of the University's work to advance Global Environmental Impact under the Strategic Plan 2020: Bold Solutions - Global Impact.

SOURCE: University of Texas at Arlington; http://www.uta.edu/news/releases/2017/06/zhou-little-lasers.php

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

Working with Optical Density

Feb. 26, 2025
Optical Density, or OD, is a convenient tool used to describe the transmission of light through a highly blocking optical filter.

Custom-Engineered Optical Solutions for Your Application

Feb. 26, 2025
Explore the newest and most widely used applications of Semrock optical filters.

Linear Stages & Rotary Stages for High Precision Automation & Motion Control

Feb. 13, 2025
Motorized Linear Translation Stages & Rotary Precision Positioning Stages for High Performance Automation & Motion Control | PI USA

Motion Controllers for Precision Positioning and Automation

Feb. 13, 2025
PI manufactures a range of precision motion controllers and drivers for positioning systems, including stepper motors, brushless motors, and servo motors.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!