Silk spins out biologically based light-emitting OLETs

Nov. 1, 2011
Biodegradable silk proteins have been demonstrated to function as edible optical components including diffraction gratings and lenses, as well as silk-based biosensors.

Biodegradable silk proteins have been demonstrated to function as edible optical components including diffraction gratings and lenses, as well as silk-based biosensors. Now, researchers at Consiglio Nazionale delle Ricerche (CNR; Bologna, Italy) and Tufts University (Medford, MA) have successfully integrated silk proteins into organic light-emitting transistors (OLETs) in a broader effort to move toward “eco-sustainable” practices in optoelectronics manufacturing.

To fabricate the OLETs, the team initially fabricated n- and p-type silk organic field-effect transistors (OFETs) by spin-coating a water-insoluble, 400-nm-thick film of silk fibroin onto an optically transparent glass/indium tin oxide (ITO) substrate. Organic semiconductor layers and top metal contacts completed the OFET devices, which exhibited lower voltage thresholds and nearly no electrical hysteresis when compared to polymethylmethacrylate (PMMA)-based OFETs. Finally, the best p-type OFET was used to construct a unipolar OLET device. With a forward voltage of 90 V, the light-emission intensity was recorded at 100 nW, demonstrating the first observation of electroluminescence emission from an OLET device using silk as the gate dielectric material.

Contact Roberto Zamboni at [email protected].

About the Author

Gail Overton | Senior Editor (2004-2020)

Gail has more than 30 years of engineering, marketing, product management, and editorial experience in the photonics and optical communications industry. Before joining the staff at Laser Focus World in 2004, she held many product management and product marketing roles in the fiber-optics industry, most notably at Hughes (El Segundo, CA), GTE Labs (Waltham, MA), Corning (Corning, NY), Photon Kinetics (Beaverton, OR), and Newport Corporation (Irvine, CA). During her marketing career, Gail published articles in WDM Solutions and Sensors magazine and traveled internationally to conduct product and sales training. Gail received her BS degree in physics, with an emphasis in optics, from San Diego State University in San Diego, CA in May 1986.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!