• Subscribe
  • Magazine
  • Podcasts
  • Videos
  • Webinars
  • White Papers
  • Buyer's Guide
  • Get Published!
    1. Commentary

    Photon sieve: the future of ultralight space telescopes?

    July 27, 2016
    A diffractive space-telescope primary could be made of an unfurlable thin film.
    John Wallace 720 5d264dd48fa1e
    Sending a telescope into space comes at a high price, for more than one reason. Launching the Hubble Space Telescope was costly because it was heavy, due in part to its massive, rigid primary mirror and mirror mount. Building the James Webb Space Telescope, let alone launching it, is costly not only due to its weight, but also the fact that it needs a massive, intricate, and expensive mechanism to allow it to unfold and then keep its various parts aligned in space. 
    (Image: NASA)
    This drawing shows the difference between a Fresnel zone plate (left) and a photon sieve (right). The latter is patterned with millions of precisely machined holes.
    This drawing shows the difference between a Fresnel zone plate (left) and a photon sieve (right). The latter is patterned with millions of precisely machined holes.
    (Image NASA/W. Hrybyk; source http://www.nasa.gov/feature/goddard/2016/nasa-team-begins-testing-of-a-new-fangled-optic)
    Example 2. Etched into a silicon wafer, the photon sieve shown below is a lab test device developed at NASA’s Goddard Space Flight Center (Greenbelt, MD); it is a miniature prototype of a future 1-m-diameter photon sieve that could one day be used in space to image the Sun at UV wavelengths. While this photon sieve brings red laser light to a pinpoint focus on its optical axis, it produces exotic diffraction patterns when viewed from the side, as seen here.
    Example 2. Etched into a silicon wafer, the photon sieve shown below is a lab test device developed at NASA’s Goddard Space Flight Center (Greenbelt, MD); it is a miniature prototype of a future 1-m-diameter photon sieve that could one day be used in space to image the Sun at UV wavelengths. While this photon sieve brings red laser light to a pinpoint focus on its optical axis, it produces exotic diffraction patterns when viewed from the side, as seen here.
    About the Author

    John Wallace | Senior Technical Editor (1998-2022)

    John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

    Email

    Continue Reading

    Sponsored Recommendations

    Working with Optical Density

    Feb. 26, 2025
    Optical Density, or OD, is a convenient tool used to describe the transmission of light through a highly blocking optical filter.

    Custom-Engineered Optical Solutions for Your Application

    Feb. 26, 2025
    Explore the newest and most widely used applications of Semrock optical filters.

    Linear Stages & Rotary Stages for High Precision Automation & Motion Control

    Feb. 13, 2025
    Motorized Linear Translation Stages & Rotary Precision Positioning Stages for High Performance Automation & Motion Control | PI USA

    Motion Controllers for Precision Positioning and Automation

    Feb. 13, 2025
    PI manufactures a range of precision motion controllers and drivers for positioning systems, including stepper motors, brushless motors, and servo motors.

    Voice your opinion!

    To join the conversation, and become an exclusive member of Laser Focus World, create an account today!