Fluorosilicone gel from NuSil Technology can cure with heat acceleration
FS-3502-1 is a two-part, white, 100 mol% fluorosilicone gel used to fill small gaps and backfill electronics in applications that require solvent and/or fuel resistance. The self-leveling, low viscosity gel is used in a 1:1 mix ratio, bonds aggressively with most surfaces, and its cure can be heat-accelerated.
NuSil Technology
Carpinteria, CA
www.nusil.com
-----
PRESS RELEASE
NUSIL TECHNOLOGY DEBUTS LOW MODULUS FLUOROSILICONE GEL
Two-part, white gel backfills electronics, boasts hydrocarbon resistance.
Carpinteria, California, June 9, 2011 — NuSil Technology LLC (http://www.nusil.com), a global leader in silicone materials for the electronics, aircraft, automotive and aerospace industries, debuts its 100 mol% fluorosilicone gel. The gel is used to fill small gaps and backfill electronics in applications that require solvent and/or fuel resistance.
FS-3502-1 is a two-part, white, fluorosilicone gel available in an easy-to-use 1:1 mix ratio. It bonds aggressively with most surfaces, and its cure can be heat-accelerated. FS-3502-1 is hydrocarbon-resistant for components exposed to aviation fuels, such as JP-8; chemicals; and solvents used in automotive, electronics and aircraft applications.
With a low Type ’00’ durometer, FS-3502-1 exhibits low modulus and absorbs stresses incurred during thermal cycling. It is a tough gel with minimal tack and low moisture permeability. In addition, electronics applications benefit from FS-3501-1’s non-corrosive properties and minimal contamination. FS-3502-1 is able to compensate for CTE mismatch and exhibits minimal shrinkage after cure.
“FS-3502-1 is another great addition to the myriad fluorosilicone products we offer,” said Brian Nash, vice president, sales and marketing. “It is self-leveling and has a conveniently low viscosity compared to other typical fluorosilicone materials.”
This product is controlled in accordance with applicable ITAR regulations and is RoHS compliant. FS-3502-1 is available in white, but can be translucent or color-matched to the Pantone Matching System (PMS) or Federal Standards.
For more information, please contact NuSil at +1 805-684-8780 or visit http://www.nusil.com/products/engineering/electronics.
###
About NuSil Technology LLC
NuSil is a leading formulator of silicone compounds for healthcare, aerospace, electronics and other applications requiring precise, predictable materials performance. ISO 9001-certified since 1994, NuSil operates state-of-the-art laboratories and processing facilities in North America and provides on-site, in-person application engineering support worldwide. More information about NuSil Technology LLC can be found at http://www.nusil.com.
-----
Subscribe now to Laser Focus World magazine; it's free!