LIGHT-EMITTING DIODES: OLED pixel array is transparent

June 1, 2006
If windows and other transparent media could be made to display information, designers would have great latitude to create self-contained head-up displays for vehicles, advertisements appearing in the window glass of boutiques, or interactive art displays.

If windows and other transparent media could be made to display information, designers would have great latitude to create self-contained head-up displays for vehicles, advertisements appearing in the window glass of boutiques, or interactive art displays. Until now, however, most attempts to do this failed because of a lack of compatibility between the various manufacturing steps. Materials must be transparent, sufficiently conductive, and capable of light emission on demand. Transparent flexible plastics are one approach; however, they are sensitive to any manufacturing processes that raise the temperature of the plastic.

Now, a group at the Technische Universität, Institut für Hochfrequenztechnik (Braunschweig, Germany) has taken an important step toward creating a practical transparent display. The scientists fabricated an array of organic light-emitting diodes (OLEDs)including their driving circuits-on a thin glass sheet, the whole being greater than 70% transparent in the visible but able to emit green light from the pixels when energized (see figure).

The electroluminescent area consists of a bilayer of hole- and electron-transport hosts of organic compounds 4,4´,4´´-tris(N-carbazolyl)triphenylamine and 1,3,5-tris(phenyl-2-benzimidazolyl)benzene, doped with facial tris(2-phenylpyridine)iridium. Such so-called double-emission layers equipped with a metal electrode had previously been fabricated and shown to be highly efficient; however, those devices were opaque.

In the new OLED device, thin-film wide-bandgap semiconducting layers of transparent zinc tin oxide (ZTO) were deposited on glass that was coated with indium tin oxide (ITO) as the material for the transistor gates; oxygen-plasma-assisted pulsed-excimer-laser deposition was used to create the ZTO layers. The overall process temperature could be kept below 150°C, making the process compatible with plastics manufacturing.

For source and drain contacts, zinc oxide doped with aluminum oxide was deposited and structured by standard photolithography using a transparent photoresist (SU-8). Transparent OLEDs with a pixel size of 1.5 x 1.5 mm were created, along with layered electrical circuits. With ITO also used as the anode, the entire system15 layers, including additional electron-injection-enhancing layers and the substrateshowed an average transparency of 70% throughout the visible.

The luminescence was measured as a function of operating voltage. At a gate voltage of 5 V, a luminescence of about 700 cd/m2 was measured. The leakage current through the gate remained at 160 nA. For an active-matrix OLED display, three to four transistors per pixel are usually required; in addition, the gate electrode must be patternedall possible with this technology.

REFERENCE

1. P. Görrn et al., Advanced Materials 2006, 18, 738.

About the Author

Uwe Brinkmann | Contributing Editor, Germany

Uwe Brinkmann was Contributing Editor, Germany, for Laser Focus World.

Sponsored Recommendations

Demonstrating Flexible, Powerful 5-axis Laser Micromachining

Sept. 18, 2024
Five-axis scan heads offer fast and flexible solutions for generating precise holes, contoured slots and other geometries with fully defined cross sections. With a suitable system...

Enhance Your Experiments with Chroma's Spectra Viewer

Sept. 5, 2024
Visualize and compare fluorescence spectra with our interactive Spectra Viewer tool. Easily compare and optimize filters and fluorochromes for your experiments with this intuitive...

Optical Filter Orientation Guide

Sept. 5, 2024
Ensure optimal performance of your optical filters with our Orientation Guide. Learn the correct placement and handling techniques to maximize light transmission and filter efficiency...

Ensure Optimal Performance with Shortpass Filters

Sept. 5, 2024
Achieve precise wavelength blocking with our Shortpass Filters. Ideal for applications requiring effective light transmission and cutoff, these filters ensure optimal performance...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!