Making photonics a priority

June 10, 2013
The recent, highly successful LASER World of Photonics tradeshow in Munich makes very clear the international nature of photonics products and applications, and the success of related businesses.
Conard Holton2 5f3c08189f8b9

The recent, highly successful LASER World of Photonics tradeshow in Munich makes very clear the international nature of photonics products and applications, and the success of related businesses. It also makes clear that countries such as Germany and regions such as Europe that have made photonics a public policy priority have benefited greatly and stand to benefit even more in the future. To remain competitive, the U.S. must do the same.

Traditionally, U.S. corporate and government support is slow to form behind policy that "chooses winners" or directs business behavior, with a preference instead for encouraging competition and entrepreneurship. Adding to the challenge, photonics is a relatively invisible technology to the public and policy makers since it is often incorporated into the core of complex systems for manufacturing, communications, or healthcare.

Now, the time has come for leaders of all organizations that understand the value of photonics to work together in support of the recently launched National Photonics Initiative (NPI). The NPI does not aim to choose winners, but it does seek to raise awareness of the importance of photonics. It is also intended to increase national coordination, and to drive funding and investment in areas critical to U.S. competitiveness and security. The initiative is led by the APS, IEEE Photonics Society, LIA, OSA, and SPIE, and draws support from many people in U.S. industry, government, and academia.

The focus will be on funding and investment in five key photonics-driven fields: advanced manufacturing, communications and information technology, defense and national security, energy, and health and medicine. Our colleagues in Europe have already established such a unified voice in Photonics21 (www.photonics21.org) in preparation for the European Union's Horizon 2020 research funding program.

The NPI is just beginning its quest to educate, affect public policy and funding, support research, and help develop an effective workforce. You can read much more about it at www.lightourfuture.org. The leaders of many photonics organizations have stepped into the limelight and it's time for the rest of the U.S. photonics community to play a part as well.

About the Author

Conard Holton | Editor at Large

Conard Holton has 25 years of science and technology editing and writing experience. He was formerly a staff member and consultant for government agencies such as the New York State Energy Research and Development Authority and the International Atomic Energy Agency, and engineering companies such as Bechtel. He joined Laser Focus World in 1997 as senior editor, becoming editor in chief of WDM Solutions, which he founded in 1999. In 2003 he joined Vision Systems Design as editor in chief, while continuing as contributing editor at Laser Focus World. Conard became editor in chief of Laser Focus World in August 2011, a role in which he served through August 2018. He then served as Editor at Large for Laser Focus World and Co-Chair of the Lasers & Photonics Marketplace Seminar from August 2018 through January 2022. He received his B.A. from the University of Pennsylvania, with additional studies at the Colorado School of Mines and Medill School of Journalism at Northwestern University.

Sponsored Recommendations

How to Tune Servo Systems: Force Control

Oct. 23, 2024
Tuning the servo system to meet or exceed the performance specification can be a troubling task, join our webinar to learn to optimize performance.

Laser Machining: Dynamic Error Reduction via Galvo Compensation

Oct. 23, 2024
A common misconception is that high throughput implies higher speeds, but the real factor that impacts throughput is higher accelerations. Read more here!

Boost Productivity and Process Quality in High-Performance Laser Processing

Oct. 23, 2024
Read a discussion about developments in high-dynamic laser processing that improve process throughput and part quality.

Precision Automation Technologies that Minimize Laser Cut Hypotube Manufacturing Risk

Oct. 23, 2024
In this webinar, you will discover the precision automation technologies essential for manufacturing high-quality laser-cut hypotubes. Learn key processes, techniques, and best...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!