Polish researchers use McPherson spectrometer for VUV-phosphor lighting research

June 22, 2011
To develop vacuum-ultraviolet (VUV)-excitable phosphors, researchers at the Institute of Low Temperature and Structure, Polish Academy of Science have contracted McPherson Instruments (Chelmsford, MA) to build a characterization system for the 120 to 1800 nm range.

Wroclaw, Poland--To develop vacuum-ultraviolet (VUV)-excitable phosphors, researchers at the Institute of Low Temperature and Structure, Polish Academy of Sciences have contracted McPherson Instruments (Chelmsford, MA) to build a characterization system for the 120 to 1800 nm range. In the system, the benign discharge of a noble gas will replace mercury excitation to produce phosphor emission under environmentally acceptable conditions.

Led by Przemyslaw Deren, the group plans to use the McPherson system to measure and characterize luminescence properties of phosphors and crystals. The research is intended to help create more efficient methods of commercial lighting. There is still work to be done in order to realize viable, efficient VUV-excited phosphors. Such phosphors will solve two important problems: ecological and efficiency. Today’s compact fluorescent lamps (CFLs) rely on mercury, which is harmful to humans and nature. The new VUV phosphors are instead excited by environmentally benign discharge in noble gases. In addition, the VUV phosphors should produce light at twice the energy efficiency as today’s CFLs.

The spectrometer system from McPherson will be used to study quantum cutting phenomena and eventually to obtain a new class of lighting fixtures. The instrument enables research efforts by allowing tunable, monochromatic VUV-wavelength sample excitation and subsequent emission measurements from the VUV to the near infrared at a much lower cost than relying on synchrotron storage rings for VUV radiation.

For more info, see www.McPhersonInc.com.

Follow us on Twitter

Subscribe now to Laser Focus World magazine; it’s free!

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Brain Computer Interface (BCI) electrode manufacturing

Jan. 31, 2025
Learn how an industry-leading Brain Computer Interface Electrode (BCI) manufacturer used precision laser micromachining to produce high-density neural microelectrode arrays.

Electro-Optic Sensor and System Performance Verification with Motion Systems

Jan. 31, 2025
To learn how to use motion control equipment for electro-optic sensor testing, click here to read our whitepaper!

How nanopositioning helped achieve fusion ignition

Jan. 31, 2025
In December 2022, the Lawrence Livermore National Laboratory's National Ignition Facility (NIF) achieved fusion ignition. Learn how Aerotech nanopositioning contributed to this...

Nanometer Scale Industrial Automation for Optical Device Manufacturing

Jan. 31, 2025
In optical device manufacturing, choosing automation technologies at the R&D level that are also suitable for production environments is critical to bringing new devices to market...

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!