• Leonardo Electronics US Inc

    Tucson, AZ 85743

    COMPANY OVERVIEW

    About Leonardo Electronics US Inc

    Contact

    7775 N Casa Grande Hwy
    Tucson, AZ 85743
    United States
    http://www.lasertel.com
    520-744-5700

    More Info on Leonardo Electronics US Inc

    Leonardo Electronics is a leading manufacturer specializing in high-performance laser diode components and systems for both defense and commercial applications. We work closely with your engineers to custom design and build robust, high-powered laser diodes tailored to your specifications. 

    Products

    Articles

    (Courtesy of II-VI)
    FIGURE 1. The 6 mm-mrad free-space rectangular BPP of the DirectProcess900 FlexShape laser engine by II-VI allows the laser to achieve spot sizes down to 0.2 mm.
    All the benefits of laser diodes apply to direct-diode systems: small size, long life, and high wall-plug efficiency.
    Lasertel focuses on custom high-power laser diode configurations, which can have short turnaround requirements.
    An interview with the president of Lasertel shows how a flexible, custom manufacturing approach to laser sources can drive growth
    FIGURE 1. The coefficient of performance (COP) of two laser-diode thermoelectric cooling modules by AMS Technologies, the TE-500 and TE-650, was characterized as a function of temperature difference (dT) and cooling capacity (Qc) using eight heat sources of 15 × 15 mm2 on top of the laser base plate and is given for an average temperature on the mounting plate.
    Laser diodes work best when cool—different cooling approaches work best for different laser powers.
    (Courtesy of Lasertel)
    An 800 kW laser-diode array developed and made at Lasertel is one of four such arrays that will pump the final power amplifier of the High-Repetition-Rate Advanced Petawatt Laser System (HAPLS) to be installed at the Extreme Light Infrastructure (ELI) Beamlines facility currently under construction in the Czech Republic.
    Lawrence Livermore National Laboratory has installed and commissioned the highest-peak-power laser-diode arrays in the world.
    One of the five arrays built by Lasertel for the ELI Petawatt laser system.
    Lawrence Livermore National Laboratory has installed high-powered laser diode arrays for the ELI high-rep-rate Petawatt laser system.
    LLNL
    The High Repetition-Rate Advanced Petawatt Laser System, or HAPLS, is being designed, developed, assembled and tested at Lawrence Livermore. It will be transferred to the ELI-Beamlines facility in 2016 (now under construction and shown here as an artist rendering), where it will be commissioned for use by the international scientific community.
    Livermore, CA--Lawrence Livermore National Laboratory has awarded subcontracts to Femtolasers Produktions and Lasertel for the HAPLS, being built for the European (ELI Beamlines...
    (Courtesy of Lasertel)
    A solid-state laser layout uses a 4.4 × 5 mm active area for end pumping using an uncooled multicolor laser-diode array (top). The resulting Nd:YAG laser has been incorporated into a so-called Ultra Lightweight Designator assembly that can operate over a temperature range of 100ºC with no thermal control in a package that weighs less than 5 lb (bottom).
    Flashlamp pumping of Nd:YAG-based solid-state lasers is rapidly being replaced by laser-diode pumping.

    Buyer's Guide Listing Information

    Click here for listing information and directions on how to add or update your company.

    Request More Information From Leonardo Electronics US Inc

    By clicking above, I agree to Endeavor Business Media's Terms of Service and consent to receive promotional communications from Endeavor, its affiliates, and partners per its Privacy Notice. I also understand my personal information will be shared with the sponsor of this content, who may contact me about their offerings per their privacy policy. I can unsubscribe anytime.